Work

Effect of fines content on reliquefaction resistance and consolidation–reconsolidation behavior of silty sand

Year: 2026
Type: preprint
Abstract: According to traditional liquefaction theory, the process of densification after the first liquefaction makes the soil more resistant to future liquefaction events. However, this has been challenged by recent field observations that silty sand can reliquefy during subsequent aftershocks. Previous research has primarily focused on the consolidation and reliquefaction behavior of clean sand, leaving the mechanisms governing these processes in silty sand largely unexplored. In this study, a series of cyclic triaxial tests were conducted on eight sand mixtures with varying fines content ( FC = 0% to 35%). The test results revealed that reliquefaction resistance increases with FC. It surpassed the first liquefaction resistance when FC ≥ 25%. For specimens prepared by the moist tamping method, inherent anisotropy initially decreased, then increased, and finally decreased again with increasing FC . Following liquefaction, the stress-induced anisotropy in the sand-like behavior region increased with FC , and continuously weakened while in the silt-like behavior region. An anisotropic coefficient ratio, R ac , was proposed. It was found that reliquefaction resistance increases as R ac decreases, and when R ac < 1 and FC ≥ 25%, the reliquefaction resistance exceeds the first liquefaction resistance. Furthermore, meso-fabric observations were employed on specimens both before and after liquefaction.
Language: English
Open Access status: green
OpenAlex ID: W7207865013
Cites: 41
Cited by:
Related to: 10