Year: 2020
Type: dissertation
Abstract: As the fast development of global economy and industry, it is imperative to develop high performance and environmentally friendly devices to satisfy the demand for energy of human beings.In this doctor dissertation, we concern on the syntheses of functional carbon-based materials and their energy-related applications, including the electrode materials for supercapacitors and potential supports for metal nanoparticles (NPs) as heterogenous catalysts.In the introduction, we mainly described the merits of functional carbon materials used as 1) electrodes for electrochemical energy storage and 2) supports for NPs for hydrogen evolution from liquid chemical hydrides.We also introduced the concerning research progresses.In the first work, the hierarchically porous carbons with high ratios of meso-/macropore volume to micropore volume and high surface areas derived from metal-organic framework (MOF)/chitosan composites were prepared, displaying excellent capacitive behaviors.In our second work, boronoxygen-functionalized carbon nanospheres successfully immobilized palladium (Pd) NPs towards efficient hydrogen generation from formic acid.In the third work, active Pd NPs immobilized on Fe 3 C/Fe-and N-functionalized porous carbon were synthesized for fast hydrogen generation from formic acid.The related outcomes of this dissertation are concluded below. (i) Hierarchically Porous Carbons Derived from Metal-Organic Framework/Chitosan Composites for High-Performance SupercapacitorsWe present the synthesis of hierarchically porous carbons through the calcination of MOF/chitosan composites.The effects of chitosan (CS) addictive on the pore structures of resultant carbons were discussed.The MOF/chitosan precursors could be converted III into hierarchically porous carbons (NPC-V, V = 1, 2, 4, and 6) with much higher ratios of meso-/macropore volume to micropore volume (V meso-macro /V micro ).The derived carbon NPC-2 with the high ratio of V meso-macro /V micro = 1.47 demonstrates a high specific surface area of 2375 m 2 g -1 , and a high pore volume of 2.49 cm 3 g -1 , as well as a high graphitization degree, comparison with its counterpart (NPC) without chitosan addition.These excellent features are favorable of rapid ion diffusion/transport, endowing NPC-2 with enhanced electrochemical behaviors as supercapacitor electrodes, corresponding to a high specific capacitance of 199.9 F g -1 and good rate capability.The good cycling stability is also observed after 10 000 cycles. (ii) Immobilizing Palladium Nanoparticles on Boron-Oxygen-Functionalized Carbon Nanospheres towards Efficient Hydrogen Generation from Formic AcidCarbon nanospheres (XC-72R) were functionalized by boron-oxygen (B-O) through coannealing with boric acid, to which highly dispersed Pd NPs (~ 1.7 nm) were immobilized by a wet chemical reduction for the first time.The Pd/OB-C catalyst exhibits significantly improved activity for the dehydrogenation from FA, compared to pristine XC-72R supported Pd NPs (Pd/C).Impressively, by adding melamine precursor, the B-O and nitrogen (N)-functionalized product OB-C-N displays an extremely high B content, ca.34 times higher than OB-C.The Pd/OB-C-N catalyst with an ultrafine Pd particle size of ~ 1.4 nm shows a superb activity, with a turnover frequency (TOF) as high as 5354 h -1 at 323 K, owing to the uniform ultrafine Pd NPs and the effect from B-O and N functionalities.(iii) Immobilizing Ultrafine Palladium Nanoparticles on Fe 3 C/Fe-and Nfunctionalized Porous Carbon towards Fast Hydrogen Generation from Formic Acid IV A Fe 3 C/Fe-and N-functionalized porous carbon with a micro-/mesoporous porosity was synthesized.This distinct carbon (Fe 3 C-Fe@NC) was used as a support to immobilize palladium nanoparticles (Pd NPs) (~ 1.4 nm) using a wet chemical reduction method.The Pd/Fe 3 C-Fe@NC catalyst exhibits a superb activity for formic acid (FA) dehydrogenation, providing a rather high turnover frequency (TOF) of 7361 h -1 at 323 K, attributed to the ultrafine Pd NPs and the effects from Fe 3 C/Fe and N in the support.In summary, this dissertation mainly concentrates on the preparation of functional carbon materials for energy-related applications, like supercapacitor electrodes and supports for NPs in hydrogen release from formic acid.We hope that the functionalization strategies of carbon materials described in this dissertation could encourage more researchers to explore more potential candidates in the practical applications of energy storage and catalysis.
Author: Zhong, Shan
Language: English
Field: Materials Science
Domain: Physical Sciences
Keywords: hierarchical porous carbon, metal-organic frameworks, chitosan, supercapacitor electrodes, metal-organic framework derived carbon, hydrogen evolution reaction, formic acid, palladium nanoparticles, heterogeneous catalysis, electrochemical energy storage, calcination, specific surface area, specific capacitance
Open Access status: green
OpenAlex ID: W7208413722
