Valorization of plastic waste into renewable fuels via thermo-catalytic pyrolysis and sequential CO2 reforming over Ni-Co-based catalysts
Year: 2026
Type: article
Abstract: Thermo-catalytic pyrolysis coupled with CO 2 reforming offers a sustainable route for the simultaneous valorization of waste plastics and greenhouse gases. Herein, waste polypropylene (WPP) was pyrolyzed over HZSM-5, HBeta, and HY zeolite catalysts. The resulting gases were separated from pyrolysis oils and subsequently reformed with CO 2 over Ni and Ni-Co-based catalysts. The zeolite framework topology significantly influenced the pyrolysis product distribution. In contrast to HBeta and HY—which generated aliphatic-rich pyrolysis oils with minor aromatic content and mixed olefin-paraffin gas streams—HZSM-5 selectively favored the formation of BTEX-dominant pyrolysis oil with lower aliphatic content, alongside a paraffin-rich pyrolysis gas. During CO 2 reforming, variations in the initial composition of the pyrolysis gas feed mixtures— produced using different zeolite catalysts—did not significantly alter the resulting syngas yields or H 2 /CO ratios. Furthermore, the reforming catalyst 10Ni-MgAl 2 O 4 exhibited similar coking behavior across all three feed compositions. Partial substitution of Ni with Co, particularly in 9.5Ni-0.5Co-MgAl 2 O 4 enhanced reactant conversion, suppressed coke deposition, and increased syngas production. These findings demonstrate that combining tailored pyrolysis with an optimized bimetallic (Ni Co) catalyst system effectively advances the simultaneous valorization of plastic waste and CO 2 .
Source: Fuel Processing Technology
Institutions: VSB - Technical University of Ostrava, University of Bologna
Language: English
Subfield: Fuel Technology
Field: Energy
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $3,180
OpenAlex ID: W7208743576
