Work

Steam reforming of dimethyl-ether : catalyst selection and deactivation studies

Year: 2026
Type: other
Abstract: Dimethyl ether (DME) steam reforming offers an efficient route for hydrogen storage and distribution within circular economy frameworks, but its practical application is constrained by catalyst deactivation. This study evaluates the catalytic performance, stability, and deactivation profiles of six bifunctional catalyst configurations under low-temperature reforming conditions and extended time on stream (ToS) periods (> 21 h), with the aim of identifying stable alternatives for hydrogen production from DME. Impregnated 15 wt% Cu/γ-Al2O3 and 15 wt% Ni/γ-Al2O3 were evaluated alongside mechanical mixtures of Cu/ZnO/Al2O3 (CZA), Cu/ZnO/ZrO2 (CZZ), CuFe2O4 spinel combined with γ-Al2O3, as well as a synthesized CuFe2O4 | γ-Al2O3 composite. All stability and activity tests were conducted in a continuous fixed-bed reactor at 350°C and 1 atm, using a feed H2O/DME molar ratio of 3 and a WHSV of 48 1/h. Thermodynamic equilibrium profiles were simulated using Aspen Plus to define the equilibrium limits of the system, and a specialized hydrogen productivity parameter (φH2) was applied to diagnose operational reaction pathways. The mechanically mixed CZA + γ-Al2O3 catalyst achieved the highest stable dimethyl ether conversion of 80.4%, a CO2 yield of 73.6%, and a stable theoretical maximum φH2 of 6.0 with negligible methanol accumulation, though it exhibited copper sintering after extended ToS. The Ni/γ-Al2O3 catalyst stabilized at 60.7% conversion and maintained a steady φH2 of 3.5 but presented a high CO yield of 51.4% and filamentous carbon formation of 182.6 mg C/gcat. The synthesized CuFe2O4 | γ-Al2O3 composite and the mechanical mixture stabilized at conversions of 35.7% and 33.2%, respectively. These spinel systems limited carbon deposition to 0.05 mg C/gcat but exhibited low φH2 values of 1.6 for the composite and 0.8 for the mixture due to kinetic limitations that left intermediate methanol unreacted. Conversely, monometallic Cu/γ-Al2O3 and the CZZ + γ-Al2O3 mixture stabilized at the lowest conversions of 31.4% and 29.6%, respectively, with φH2 values declining to 1.5 and 2.2 due to thermal copper agglomeration. These results demonstrate that while conventional copper-zinc formulations maximize initial activity, spinel-based configurations provide greater structural integrity and resistance to carbonaceous fouling during extended operation.
Language: English
Subfield: Catalysis
Open Access status: green
OpenAlex ID: W7211981583
Cites: 86
Cited by:
Related to: 10