Work

Using cellulose nanofibers as the sole binder for cement-free construction materials

Year: 2026
Type: article
Abstract: Cellulose nanofibers (CNF), fibrils extracted from wood, bind through hydrogen bonding and have served as the sole binder in wood-based panels, but to the authors’ knowledge they have not been used as the sole binder for un-sintered mineral sand without any hydraulic cement. Here we report an exploratory, proof-of-concept study in which an aqueous CNF gel (3.00–5.87 wt% solids) was the only binder for sand. Twelve compositions combined four gel solids contents with three gel-to-sand mass ratios (25:75, 40:60, 50:50), corresponding to 1.0–5.5 wt% dry cellulose in the dried composite. Cohesive solids formed at about 1 wt% dry cellulose and above, with dry compressive strengths of 0.42–3.73 MPa, comparable to rammed earth and adobe. Strength increased with both the gel fraction and the gel solids content, which interacted, so dry cellulose content alone does not describe the behaviour. Water saturation reduced strength to about 6% of the dry value; re-drying restored it (110 ± 22%), which is consistent with, but does not prove, a reversible physical binding mechanism. The results provide a preliminary composition-property map of cement-free CNF-sand composites and identify moisture sensitivity and the energy cost of drying as the main barriers to practical application.
Language: English
Subfield: Biomaterials
Open Access status: gold
Estimated APC paid: $2,690
OpenAlex ID: W7213239300
FWCI:
Cites: 47
Cited by:
Related to: 9