Passive Thermal Management of an Electric Vehicle Wireless Charging Receiver Using Electrically Insulating Silicone Thermal Interface Materials
Year: 2026
Type: article
Abstract: This study evaluates electrically insulating silicone thermal interface materials (TIMs) at the coil-to-ferrite and ferrite-to-shield interfaces of an electric-vehicle wireless charging receiver. A steady-state Maxwell–Icepak model compares TIM conductivity, interface location, and coverage using prescribed winding currents of 15 A peak at 85 kHz and an ambient temperature of 25 °C. For the bare receiver, the predicted coil hotspot is 82.49 °C, which is 2.51 °C below the study’s internal screening reference of 85 °C. With TIM-B at both interfaces and 100% coverage, the predicted hotspot falls to 64.54 °C, a reduction of 17.95 °C. A single TIM-B layer retains 83.7–85.1% of this reduction while using half the TIM volume. At 110% and 120% coverage, the predicted coil hotspots are 59.90 and 60.28 °C. Their 0.38 °C difference does not support a definitive ranking. These results apply to the modeled geometry, thermal boundaries, and fixed-current excitation.
Source: Electronics
Authors: Ziying Song(Conceptualization, Methodology, Visualization, Writing – original draft), Jiajie Liu(Data curation, Formal analysis, Methodology, Writing – review & editing), Sicheng Yi(Data curation, Methodology, Software, Writing – original draft), Xinyue Liu(Data curation, Visualization, Writing – original draft), Yelin Si(Formal analysis, Investigation, Methodology), Feng Li(Funding acquisition, Project administration, Supervision), Ting Yin(Methodology, Project administration, Resources, Validation)
Language: English
Subfield: Electrical and Electronic Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $2,896
Award: G7612163860
OpenAlex ID: W7213457357
