Work

Design, Simulation, and Experimental Validation of a Soft Robotic Finger with Variable Stiffness and Embedded Sensing

Year: 2026
Type: article
Abstract: This work presents a soft finger that combines pneumatic actuation, variable stiffness, and embedded sensing and was designed, simulated, and experimentally tested. The finger integrates a fiber-reinforced pneumatic actuator with three interconnected chambers, located at the metacarpophalangeal (MCP), proximal interphalangeal (PIP), and distal interphalangeal (DIP) joints, which generate single-input underactuated bending. The prototype was fabricated by silicone casting in 3D-printed molds and incorporates a bio-based granular filler that allows post-deformation stiffening. Bending under pressurization was simulated with the Finite Element Method (FEM) in ANSYS using hyperelastic and fiber-composite material models. The simulation reproduces the trend of the experimental bending curve, with a mean absolute difference of approximately 8.7° over the tested pressure range. Vacuum-induced granular jamming increased the stiffness (slope of the force–displacement curve) by up to 35% and the mean applied force by up to 60% relative to the unstiffened state. A microphone embedded in the fingertip recorded distinct vibration signatures on three 3D-printed textured surfaces, indicating its potential for texture sensing; texture discrimination was not quantitatively validated. These results show that finger deformation and stiffness can be controlled with minimal hardware and a simple design, supporting its use as a component in soft grippers or robotic hands.
Source: Actuators
Language: English
Open Access status: gold
Estimated APC paid: $2,896
OpenAlex ID: W7214093547
FWCI:
Cites: 41
Cited by:
Related to: 10