Year: 2025
Type: dissertation
Abstract: The global transition toward electrified transportation has positioned electric vehicles (EVs) as a cornerstone of sustainable mobility, yet the reliability and safety of their powertrains remain critical challenges.This thesis addresses errors within permanent magnet synchronous motor (PMSM)-based electric powertrains, which propagate through tightly coupled subsystems, degrading performance and functional safety.Unlike catastrophic faults, these errors originate from non-idealities in sensors, power electronic inverters, analog-to-digital converters, and microcontrollers during normal operation and when mission-critical components such as inverters and position sensors operate in degraded or fault-tolerant modes.In such scenarios, measurement and estimation inaccuracies become more pronounced and, in multi-motor architectures, are further amplified by interactions between drive units.Initially, a comprehensive literature review examines error sources in vital powertrain components during regular and fault-tolerant operation.Building on this foundation, three distinct error mitigation strategies are developed.For single-motor PMSM drives, an Enhanced Adaptive Selective Harmonic Annulation algorithm embedded within a Finite Control Set Model Predictive Current Control framework provides unified, real-time compensation for hybrid errors by suppressing harmonic distortions in dq-axis currents.For quad-motor drivetrains, a correlative correction strategy exploits inherent coupling through a shared DClink, enabling simultaneous estimation and compensation of offset and scaling errors using algebraic relationships between inverter switching states and current flow paths.For dual-PMSM all-wheel-drive powertrains, a robust fault-tolerant framework addresses rotor position sensor failure using a hyperbolic tangent-based sliding mode observer, while a blended weighting transition algorithm enables seamless handover from sensor-based to sensorless operation, leveraging front motor speed feedback to enhance low-speed estimation.Experimental and comprehensive simulation results establish that system-level error mitigation, rather than component-level isolation, is essential for ensuring the reliability, efficiency, and functional safety of next-generation electrified propulsion systems.The research contributes a comprehensive software-based safety framework addressing sensor imperfections from gradual degradation to complete failure, advancing the development of safer and more dependable EVs.Nomenclature đ 1 , đ 1 Scaling ratios in motor subsystem 1 đ đ Centre of the rotor đ đ Centre of the stator đś đ /â Internal Sampling capacitor đ đ Centre of rotation đ đđź,đ˝ Component of extended EMF associated with the fundamental đ âđź,đ˝ Component of extended EMF associated with the harmonics đ đź,đ˝ Extended EMF in the đź-axis and đ˝-axis respectively đ2 đź , đ2 đ˝ Back-EMF estimates đš đđđđ Aerodynamic drag force đ đ Stator electrical frequency đťđ đˇđś High DC-bus voltage đ đ´ Load current đ AM1_t1_1 , đ AM1_t1_2 Currents sampled by the phase-A current sensor đ đ_đđđ , đ đ_đđđ Measured currents in the abc reference frame đ B1_t3_1 , đ B1_t3_2 Actual phase-B currents in motor subsystem 1 đ đđ DC-bus current đ DC1_t1_1 , đ DC1_t1_2 Currents sampled by the DC-bus sensor đ đ , đ đ Stator dq-axis currents đ đ_đ´đđťđ´ , đ đ_đ´đđťđ´ q-axis and d-axis compensation currents đ A 1 Ⲡ, đ đľ1 ⲠCompensated phase-A and phase-B currents
Author: Wireko-Brobby, Alexander
Institution: University of York
Language: English
Subfield: Electrical and Electronic Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: green
OpenAlex ID: W7214268277
