Work

Calculation of normal forces in hangers of tied-arch-bridges based on frequency measurements considering model uncertainty and boundary condition sensitivity

Year: 2026
Type: article
Abstract: Tied-arch bridges in railway infrastructure are increasingly exhibiting fatigue damage at the connection details of the vertical hangers. To assess their structural condition, short-term vibration measurements are taken on the hangers to determine their natural frequencies. This allows the normal forces acting on them to be calculated using prestressed modal analysis. Measurements conducted on seven tied-arch railway bridges revealed systematic deviations between the designed and actual normal forces, with discrepancies of up to 45% between hangers of identical length and construction. These deviations are attributed to complex fabrication and assembly processes during construction, including the effects of temperature, welding sequences, and support conditions during erection. As there is no independent validation method for the frequency-based approach, the accuracy of the back-calculated forces critically depends on the modelling assumptions. This paper investigates the sensitivity of normal force identification with respect to two key parameters: (i) the rotational connection stiffnesses at the arch and stiffening girder; and (ii) geometric imperfections in the form of sinusoidal pre-deflections. A parametric study based on Timoshenko beam theory shows that the uncertainty range between pinned and fully clamped boundary conditions remains significant, even for long hangers. An analytical investigation based on the Rayleigh–Ritz method shows that initial imperfections alter the natural frequencies through the coupling of longitudinal and transverse vibration modes. These findings lay the groundwork for the development of simplified, practical back-calculation recommendations.
Language: English
Open Access status: diamond
OpenAlex ID: W7214733206
FWCI:
Cites: 4
Cited by:
Related to: 10