Year: 2026
Type: article
Abstract: The cutting thickness has a significant impact on surface quality: the thinner the cutting thickness, the easier it is to achieve good surface quality. The minimum cutting thickness represents the limit for chip formation. Theoretically, performing ultra-precision cutting at the minimum cutting thickness enables the achievement of an excellent machined surface with minimal surface damage and exceptional surface quality. Therefore, exploring the formation mechanism of the minimum cutting thickness and investigating the formation mechanism of surface micro topography under extreme cutting conditions are of great significance for further clarifying the extreme cutting theory, improving surface quality, and extending tool life. A dynamic minimum cutting thickness theory is proposed, followed by calculations and simulations. Furthermore, scratch experiments on aluminum alloys and red copper are conducted using a single-crystal diamond tool, during which the cutting force and scratch depth are measured. The minimum cutting thickness of aluminum alloys and red copper is determined by leveraging the corresponding relationship between the abrupt change in cutting force (from the plowing stage to the cutting stage) and the scratch depth. Based on the minimum cutting thickness, the optimal cutting parameters for the non-free cutting of aluminum alloys and red copper were obtained, and non-free cutting experiments were conducted using these parameters. The results show that the minimum cutting thickness of aluminum alloys and red copper increases with increasing feed rate. The ratios of the minimum cutting thickness to the tool edge radius are in the ranges of 0.243–0.271 and 0.20–0.36, respectively. The optimal surface roughness values are as follows: Rz = 1.505 μm and 2.014 μm, and Ra = 0.293 μm and 0.309 μm, respectively
Institutions: Henan Polytechnic University, South Ural State University
Language: English
Subfield: Mechanical Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: diamond
OpenAlex ID: W7214757777
