Work

High Translucent and Multilayer Zirconium Dioxide Ceramic Materials for Dental Restorations: Studies on how processing factors influence material properties

Year: 2026
Type: dissertation
Abstract: Zirconia materials are widely used for dental restorations to replace missing teeth, as they offer favourable mechanical properties, excellent biocompatibility, and good aesthetics. To improve the aesthetics of restorations, several zirconia types with highly varying material properties have been developed in different generations. Given the widespread use of these materials, it is essential to ensure the long-term performance of zirconia restorations to provide predictable and patient-safe treatments. The overall findings of the thesis emphasize that laboratory and clinical-related processing factors influence the microstructure, crystal structure, and thus the properties of high translucent and multilayer zirconia differently depending on the zirconia type. Therefore, zirconia materials should be selected with awareness based on the specific clinical requirements of each patient and handled based on the zirconia type. The various zirconia types are stabilized with different amount of yttria, typically 3-6%, and are therefore called 3-, 4-, 5-, and 6YSZ (yttria-stabilized zirconia). Multilayer zirconia materials consisting of either layers with different zirconia types and properties (composition-gradient) or layers with different shades (shade-gradient) have also been developed. Since the yttria content differs between zirconia types, the microstructure, crystal structure, and material properties also differ significantly. During the manufacturing of restorations in the dental laboratory, several processing steps – such as sintering, grinding, polishing, and glazing – are required. In the clinic, the restoration is adjusted by grinding and polishing for adaptation to the patient's dentition. These processing factors can have a significant effect on the properties of zirconia, and these effects can vary between zirconia types, potentially compromising the longevity of the restoration. The overall aim of the thesis was therefore to evaluate the influence of laboratory and clinical-related processing factors on the material properties of high translucent and multilayer zirconia materials. Study I, a systematic review, evaluated how processing factors and time-related factors affect the material properties of specific zirconia types. The results showed that 3YSZ should be sintered according to the manufacturer's recommendation and polished before glazing to favour strength, surface roughness, and wear behaviour. Polishing after clinical adjustments by grinding is necessary to favour ageing resistance and roughness. The results were dependent upon zirconia brand, and the evidence relating to other zirconia types and processing factors was too limited for conclusions to be drawn. Based on the knowledge gaps identified in Study I, two laboratory studies were conducted. Study II investigated the influence of laboratory polishing, glazing, and clinical adjustments on the mechanical and surface properties of multilayer zirconia materials. Composition-gradient zirconia should be polished, and shade-gradient zirconia should be polished and glazed in the laboratory to favour strength and surface roughness. Clinical adjustments of zirconia with high yttria content (≥ 5YSZ) are detrimental for the strength and should be performed with caution. Study III evaluated the influence of sintering programmes on the microstructure, crystal structure, optical and mechanical properties of multilayer zirconia. The density and strength of multilayer zirconia are material dependent and are not significantly affected by the sintering programme. Shorter sintering programmes reduce the tetragonal crystal phase of composition-gradient zirconia. Further research is required to verify that shorter sintering programmes result in equivalent material properties as conventional sintering. In conclusion, high translucent and multilayer zirconia materials require material- specific handling during the manufacturing and clinical adjustments of restorations. Sintering influences the microstructure, crystal structure, and potentially the properties of zirconia and should be performed according to the manufacturer's recommendations. Polishing is preferable over glazing in the laboratory and necessary after adjustments in the clinic.
Institution: Malmö University
Language: English
Field: Dentistry
Open Access status: green
OpenAlex ID: W7215119232
Cites: 1
Cited by:
Related to: 10