Work

Density and mechanical properties of bio-based foams

Year: 2022
Type: dissertation
Abstract: Mold foaming was used to invent bio-based foams for insulating materials made from grinded wood and paper pulp.The impact of wood fiber particle size, surface treatment, and content on the density and mechanical properties of foams was examined in this work.The density, compressive strength, and tensile strength of the bio-based foams were found to be significantly influenced by the size and amount of the wood fiber.Lower wood fiber size aided in improved foaming, and among the specimens studied, a foam with 29 wt-% of 0.25 mm and smaller than 0.25 mm wood powder produced the best mechanical qualities.The attributes of the bio-based foam at the optimum processing parameters were as follows: density of 0.907 g•cm -3 , compressive strength of 124.9 kPa, and tensile strength of 1126.9 kPa.In the beginning, increasing the wood fiber percentage enhanced the compressive strength, but increasing the wood fiber fraction also raised the tensile strength, which afterwards dropped.Overall, the biodegradable foams created here exhibited promising as good insulation materials based on their density, physical and mechanical qualities.
Language: English
Open Access status: green
OpenAlex ID: W7215496344
Cites: 128
Cited by: 1
Related to: 10