Work

Three dimensional printing of biopolymers

Year: 2019
Type: dissertation
Abstract: Annually, large proportions of waste are generated from plants, bird feathers, wool and animal hair. Currently, some of these are recycled while the rest are sent into landfilling which contributes to an increased pollution of the environment. The aim of this work was to provide an alternative use for these biopolymer materials by utilizing three dimensional printing (3PD) technology which will provide environmental and economically friendly solution to reduce waste. These bespoke 3DP parts can be used for biomedical (drug delivery), packaging and wastewater treatment applications. Due to the presence of strong intra and inter molecular bonds, applications of biopolymers like cellulose and keratin are currently hindered. A wide variety of literature has been published on successful dissolution of these biopolymers in ionic liquids, casting on glass to form films and regeneration using an anti-solvent (mainly water) to remove the ionic liquid. This research attempts to fill the knowledge gap that exists between 3DP and biopolymers by utilizing a novel system. This will involve a biopolymer-ionic liquid-based ink and ink jet printing technology. The first results chapter uses a DIMATIX ink-jet printer. Due to the viscosity restrictions with this printer, a co-solvent DMSO, was added as a rheological modifier to bring the viscosity of the inks within the printing range. The major limitation of this technique was the requirement of large quantities of co-solvent (32 to 47 wt%) while the amount of cellulose dissolved in the inks was limited to less than 1.5 wt%. This was well below the cellulose loading that could be dissolved in ionic liquids. In order to increase the cellulose loading, a PICO Pulse printer that does not have ink viscosity limitations was used. This allowed an increase in cellulose loading up to 13 wt%. More inks were formulated in ionic liquids using keratin and combination of keratin and cellulose (blends). When the printed films were left overnight at room temperature, they formed gel like films. The majority of films cracked after removed from the anti-solvent bath due to the loss of solvent. Characterisation experiments conducted on these films indicated the presence of large quantities of water and ionic liquid in the films. This research has demonstrated that future work should focus on modifying the glass substrate surface and thereby minimizing the distortion of the pattern during printing. Modifications to the current printing set-up can be achieved by using a support material, printing into an anti-solvent bath and spraying the anti-solvent to maintain the shape of the pattern. A new printing method like binder jetting can also be used for future printing.
Language: English
Open Access status: green
OpenAlex ID: W7217636782
Cites: 236
Cited by: 1
Related to: 10