Work

Liquid metal-based devices for energy harvesting and health monitoring through human sweat

Type: dissertation
Abstract: The skin, being the largest organ in the human body, contains various structures such as sweat glands, hair follicles, hair arrector muscles, and sebaceous glands.Except for specific areas like the vermillion border of the lips, the majority of the skin is equipped with sweat glands that continuously secrete sweat.Studies have reported the secretion of approximately 200-600 g•m -2 •day -1 of sweat from the skin.Sweat comprises water, ions, lactate, glucose, and other metabolites, which not only provide information about the health status but also contain biological energy.Hence, this naturally produced biological energy presents an environmentally friendly, renewable source that can be utilized to power wearable devices.To harness this biological energy from sweat, the development of stretchable and conformal wearable biofuel cells is necessary.Liquid metal-based materials, particularly gallium alloys, demonstrate promise due to their stretchability, conformal properties, and biocompatibility.In this study, liquid metals were employed to fabricate stretchable biofuel cells aiming to harvest energy from sweat and to develop sweat sensors to detect analytes such as glucose, lactate, sodium ions, and potassium ions in sweat.We utilized screen-printing method and transfer-printing method to pattern liquid metal circuits on polydimethylsiloxane (PDMS) substrates, which resulted in a metal-polymer conductor (MPC).The MPCs are with a maximum tensile strain of over 200%.After structural designing of the liquid metal-based biofuel cell patch, it allowed the carbon electrodes of the biofuel cell to retain their shape even when subjected to a strain of 40%.By modifying glucose oxidase or lactate oxidase, we fabricated glucose biofuel cells and lactate biofuel cells, respectively.With 0.2 mM glucose, the glucose biofuel cell attained a maximum power density of 14.11 μW•cm -2 .With the lactate concentration of 15 mM, the lactate biofuel cell achieved a maximum power density of 31.00 μA•cm -2 .By connecting extra booster module to harvesting energy, the biofuel cell patch was used to power wearable sensors, such as temperature, oximeter, and heart rate sensors, to monitor subjects' physical metrics during exercise.
Author: Zhong, Leni
Language: English
Open Access status: green
OpenAlex ID: W7218324053
Cites: 105
Cited by:
Related to: 10