Work

Conversion of industrial CO2 to value-added fuels and chemicals via Fischer-Tropsch upgrade

Year: 2021
Type: dissertation
Abstract: Different solutions can be implemented to reduce the impact of human activities on the environment and target the carbon transition towards a fossil-free society.Carbon capture and utilization (CCU) represents a way to reduce the concentration of CO2 in the atmosphere, promote a circular economy production scheme, and avoid the extraction of fossil hydrocarbons.As such, mixing anthropogenic CO2 with hydrogen obtained through electrolysis can generate synthetic carbon compounds that offset their fossil counterparts.In this framework, this doctoral dissertation explores the possibility of converting nonfossil carbon feedstocks (e.g., waste CO2 and organic digestate) into marketable Fischer-Tropsch (FT) products.It combines Fischer-Tropsch (FT) kinetic model information with process modelling to derive techno-economic considerations on the most effective process route to produce Fischer-Tropsch waxes.Chapter 1 presents the context and boundaries of this work, with reference to the concept of circular economy applied to carbon molecules/sources.An overview of the non-fossil carbon feedstock selected for this analysis, which are biogas, air, and digestate biomass, is provided.Concerning biogas and air, these can be regarded as flows having mildly concentrated CO2 that can be captured and fed to downstream conversion processes.Digestate can be considered as a feedstock of carbon material coming from the process of anaerobic digestion.Finally, the market potential of Fischer-Tropsch waxes is covered.Chapter 2 describes the FT technology.Different reactor designs and catalysts information are provided with reference to their state-of-the-art.Moreover, the chapter describes the activities carried out within this investigation on Fischer-Tropsch kinetic modeling.A Co-Pt/γ-Al2O3 catalyst was tested under several industrial-like conditions.Experimental data were collected using the online gas chromatography technique on the Fischer-Tropsch gas fraction and offline gas chromatography on the liquid and wax fractions.The experimental data were used to feed global and local optimization routines with non-linear least-squared fitting procedures to derive different kinetic models.The final kinetic model represented a detailed mechanistic one, capable of describing the FT product distribution of nparaffins up to carbon number C80 and α-olefins up to carbon number C40.Kinetic information was included in process modeling to find the most suitable plant designs to convert non-fossil compounds into Fischer-Tropsch liquids and waxes.Chapter 3 and Chapter 4 provide the process modelling methodology and results, respectively.11 process designs were investigated: 4 for the conversion of biogas, 2 for the conversion of digestate, and 5 for converting direct air CO2.For biogas, the chemical scrubbing technology fed with MEA solvent was utilized for capturing CO2.Moreover, the syngas required by the FT reactor was produced inside a reverse water-gas shift reactor coupled with an alkaline electrolyser for green hydrogen generation or in a solid oxide electrolyser working at thermoneutral conditions.Both options operated at either ambient pressure or 25 bar.Additionally, digestate was gasified inside a dual fluidized bed reactor for syngas generation.Afterward, a solution utilizing the Fischer-Tropsch off-gas as fuel for electric generation was compared against recycling the off-gas into the gasifier for higher throughput of synthetic hydrocarbons.Lastly, CO2 was extracted from the air with the direct air capture (DAC) technology operating at high temperature, coupled with H2 production via alkaline electrolysers.Within this process route, it was assessed the substitution of fossil hydrocarbon with Fischer-Tropsch off-gas to sustain the capture process.Lastly, an electrified DAC option was investigated.All the process models were evaluated from both a technical and economic point of view.Key performance indicators were assessed to account for the system effectiveness in converting carbon material to FT compounds.Moreover, the cost of FT wax production was determined and compared.The outcomes of the techno-economic analysis show that using digestate as the carbon feedstock provides the least energy-intensive processes to generate FT material.From an economic point of view, biogas as carbon feedstock provides the most economically ready routes to generate FT waxes.On the contrary, using CO2 from the air is the most expensive solution.Finally, the processes converting CO2 from biogas and air present a higher variation of the wax production cost depending on the electricity cost than the routes utilizing digestate, given the presence of the electrolysers for H2/syngas production.Furthermore, the results of the techno-economic investigation of the biogasto-FT and digestate-to-FT were engaged to account for the potential production of FT wax at the European level (Chapter 5).Specifically, it was assessed the potential outtake of carbon dioxide and digestate material coming from both biogas and biomethane plants currently operating in Europe.Biomethane plants are the ones with a ready-to-use stream of CO2 derived from the installation of biogas upgrading units.Consequently, the amount of FT wax generated was evaluated.Lastly, it is possible to identify 17 plants with feasible market entry characteristics to produce the FT waxes throughout Europe.Conclusions and outlooks of this investigation are provided in Chapter 6.This dissertation represents the end of an exciting period of 3.5 years of Ph.D. research activities and advanced education that I carried out at the Department of Energy of Politecnico di Torino.I am extremely grateful for the opportunity that I had, and I will make the most out of all the knowledge that I acquired and the experiences that I had.First and foremost, I would like to thank my supervisor, Andrea (prof.Andrea Lanzini).This entire journey would not have been possible without his suggestions and directions.I am grateful for the trust and responsibilities that he gave me from day 1 in my research work.I must also thank him for never suppressing my desire to explore the World -literally -and supporting all the activities I proposed to him.Research-wise and personal-wise, I have grown a lot thanks to his valuable knowledge, teachings
Source: PORTO@Iris
Language: English
Subfield: Catalysis
Open Access status: green
OpenAlex ID: W7219504101
Cites: 263
Cited by: 2
Related to: 10