ZMaysFuel: INOVASI RENEWABLE FUEL LIMBAH TONGKOL JAGUNG SEBAGAI BIOMASSA POTENSIAL PRODUKSI BIOETHANOL MELALUI METODE FED-BATCH SSF TERMODIFIKSI ION MINERAL PO43-/Mg2+/Fe2+
Year: 2024
Type: article
Abstract: Indonesia, as a country rich in natural resources, has the opportunity to develop bioethanol to replace fossil energy sources which are less abundant. Bioethanol can be made from biomass containing sugar, starch or cellulose which has been processed into glucose. Compared to other types of biomass, corn cobs are the ideal raw material choice for ethanol biosynthesis with a high lignocellulosic composition, so they can be used as raw materials for bioethanol production with cellulose (38.9%), hemicellulose (28.5%), lignin ( 20.5%). Unfortunately, the rate of development of bioethanol utilization in Indonesia cannot yet be compared to biodiesel, even though the opportunity for bioethanol to achieve success like biodiesel is also large. This can be seen by the issuance of regulations in accordance with the quality standards set by the Minister of Energy and Mineral Resources Number 252.K/HK.02/DJM/2023 which regulate the use of E5 (5% bioethanol and 95% gasoline) in 2023. Therefore, in this research The fed-batch SSF method used aims to produce high bioethanol yields from corncob biomass waste, shorten fermentation time, reduce production costs, and avoid the risk of contamination. To produce optimum bioethanol products using Saccaromicess Cerevisiae through the fed-batch Simulthaneous Saccharification and Fermentation (SSF) process, the mineral ion PO43- (5, 7.5, and 10 ppm), Mg2+ ions (2, 5, and 8 ppm) are added. , and Fe2+ ions (4, 5, and 6 ppm) with a S. Cerevisiae strain concentration of 3% (w/v) and fermentation times of 24, 48, and 72 hours. The optimum value to obtain parameters that comply with bioethanol quality standards for fuel is analyzed using Analysis of Variance (ANOVA) and Response Surface Method (RSM). Optimum operating conditions for the addition of PO43-/Mg2+/Fe2+ mineral ions were modified using the method by adding mineral ions to the fermentation medium and multilevel distillation was carried out until the content reached 95-99.5%, then quality tests were carried out for density, concentration, specific gravity, API Gravity. , and calorific value.
Institution: Institut Teknologi Sepuluh Nopember
Language: English
Subfield: Biomedical Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: bronze
OpenAlex ID: W7220348001
