Effect of plastic deformation on corrosion, biological and technological properties of anodized Ti6Al4V ELI implants
Year: 2026
Type: article
Abstract: Electrochemical anodization improves the surface properties of titanium implants, but the resulting oxide layer may be damaged by plastic deformation during insertion or service. This study investigated how four deformation levels, together with an undeformed reference, affect anodized Ti6Al4V ELI. Surface morphology, roughness, wettability, microstructure, cytocompatibility, and electrochemical behavior were evaluated. Deformation progressively increased surface roughness and induced micro- and macrocracking of the anodic layer, while all surfaces remained hydrophilic. Damage to the oxide markedly reduced corrosion protection: the corrosion rate increased from approx. 50 to 650 nm year⁻¹, whereas polarization resistance decreased from 11,920 to 327 kΩ·cm². Electrochemical impedance spectroscopy indicated facilitated ionic transport through deformation-induced defects. Nevertheless, no cytotoxic effect on MC3T3-E1 cells was observed, and differences in cell viability were not statistically significant. Thus, plastic deformation substantially impairs the electrochemical barrier function of anodized Ti6Al4V ELI without adversely affecting its short-term cytocompatibility.
Source: npj Materials Degradation
Language: English
Subfield: Materials Chemistry
Field: Materials Science
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $2,590
Awards: G8317604158, G9001368851
OpenAlex ID: W7220681894
