Work

Color Changes in Natural Diamonds During Cutting and Polishing: The Role of Crystal Defects, Plastic Deformation, and Technological Factors

Year: 2026
Type: article
Abstract: Author: Nona D. Dronova Article type: Research-based scientific article derived from a 1991 Candidate of Sciences dissertation Fields: Mineralogy, Crystallography, Gemology, Diamond Processing Technology Abstract This article presents a systematic analysis of the mechanisms responsible for changes in the coloration of natural diamonds during their transformation into polished gemstones. The study examines the relationships between the initial optical properties of rough diamonds, crystal lattice defects, nitrogen-related color centers, plastic deformation, and the mechanical and thermal conditions of diamond processing. The research summarized here combines statistical investigations of diamond color before and after processing with optical spectroscopy, photoluminescence measurements, structural defect analysis, and experimental modeling of diamond–tool interactions. Particular attention is devoted to nitrogen-related N3 centers, dislocation structures, internal stresses, and localized plastic deformation as factors influencing the optical behavior of diamond crystals. The results indicate that diamond color may change during mechanical processing and that such changes are associated with the interaction of intrinsic crystal characteristics and processing-induced structural modifications. The study also examines changes in photoluminescence intensity, the development of brown coloration, and the role of contact temperatures and mechanical stresses in the modification of diamond defect structures. A systems-based framework is presented for understanding the relationship between processing parameters, structural transformations, and the final optical properties of polished diamonds. The findings provide a methodological basis for investigating color stability, improving the assessment of rough diamond characteristics, and analyzing technological factors affecting the production of polished diamonds. Keywords: natural diamonds; rough diamond; diamond coloration; color change; N3 centers; crystal lattice defects; plastic deformation; dislocations; photoluminescence; diamond cutting; diamond polishing; contact temperature; gemology. 1. Introduction Color is one of the principal quality characteristics of natural diamonds and an important determinant of the commercial value of polished gemstones. In addition to weight, clarity, and cutting quality, the color grade of a polished diamond significantly influences its market classification and economic value. The conventional assessment of rough diamonds relies on the examination of their original physical and optical characteristics. However, the color of a finished polished diamond does not always correspond exactly to the coloration observed in the original crystal. During cutting and polishing, diamond crystals are exposed to mechanical forces, localized contact stresses, frictional heating, and other technological influences. Under certain conditions, these factors may affect the structural and optical characteristics of diamond, including the behavior of optically active defects. The central scientific problem is therefore to determine how the original defect structure of natural diamonds interacts with mechanical and thermal processing conditions to influence the color of the resulting polished stones. This article presents the principal scientific findings of Nona D. Dronova's 1991 dissertation, Changes in Diamond Color During Processing into Brilliant-Cut Diamonds: Systems Analysis and Experimental Investigations. Its purpose is to organize the original research results into an integrated scientific discussion of diamond color changes, crystal defects, plastic deformation, and processing-related physical mechanisms. 2. Research Materials and Methods The original investigation combined statistical analysis of diamond color characteristics with experimental studies of optical properties, crystal defects, and the physical processes associated with mechanical processing. 2.1. Statistical analysis The research examined the color characteristics of natural diamonds supplied for industrial processing and compared them with those of the polished diamonds produced from them. According to the dissertation abstract, the investigations included the study of more than 2,000 diamond crystals. The experimental program also involved 177 specially prepared plane-parallel diamond plates used for detailed observations. Additional production data were analyzed to establish relationships between initial diamond color, crystal size and weight, processing conditions, and the optical characteristics of finished polished stones. 2.2. Optical and spectroscopic investigations The analytical methods included optical and electronic spectroscopy, infrared absorption spectroscopy, photoluminescence investigations, microscopic examination, and polarization-optical techniques. Photoluminescence measurements were used to study the behavior of optically active centers and their response to mechanical processing. The combined analytical approach enabled the comparison of changes in optical properties with the presence of crystal defects and the technological history of the samples. 2.3. Experimental investigation of processing effects The research included experimental modeling of the mechanical interaction between diamond crystals and processing tools. Particular attention was devoted to local contact conditions, including mechanical stresses, frictional heating, and the development of plastic deformation. A method for estimating the temperature of diamond frictional contact surfaces was also developed and investigated. Systems analysis was used to examine the relationships among technological parameters, physical processes, structural defects, and observed changes in optical properties. 3. Statistical Evidence of Diamond Color Changes The statistical results demonstrated that the color characteristics of rough diamonds are not necessarily preserved throughout mechanical processing. Changes in coloration were observed in a portion of the investigated diamonds, with their occurrence depending on the initial crystal characteristics and processing conditions. In one of the production datasets described in the dissertation abstract, approximately 5% of the original diamond population exhibited changes associated with the appearance or intensification of brown coloration. The same investigation identified cases of improvement in observed color characteristics, accounting for approximately 2% of the population considered. These percentages represent the specific historical materials and technological conditions investigated and should not be generalized to contemporary diamond manufacturing without additional evidence. The results demonstrate that processing-related color changes are not necessarily unidirectional. Both unfavorable and favorable modifications of observed coloration may occur, depending on the original characteristics of the diamond and the conditions of mechanical treatment. This finding emphasizes the importance of assessing the structural and optical properties of rough diamonds before processing. 4. Nitrogen-Related Centers and Diamond Coloration An important component of the investigation concerned the relationship between nitrogen-related crystal defects and the optical properties of natural diamonds. Particular attention was given to N3 centers and their association with coloration and luminescence characteristics. The original study considered the presence of these centers as one of the factors relevant to understanding the behavior of diamond color during processing. The optical properties of natural diamonds, however, depend on the combined effects of multiple defect types, their concentrations, and their interactions with other structural features. Consequently, the presence of a particular nitrogen-related center should not be interpreted as a complete explanation of the coloration of an individual diamond. The research examined relationships among nitrogen-related centers, dislocations, internal stresses, absorption characteristics, and luminescence behavior. The findings support the importance of combining spectroscopic observations with structural analysis when investigating processing-induced color changes. 5. Changes in Photoluminescence During Diamond Processing The experimental investigations demonstrated that mechanical processing may alter the photoluminescence intensity of diamond crystals. The dissertation abstract describes observations of luminescence excited by ultraviolet radiation at a wavelength of 365 nm. Measurements were conducted at different stages of processing, allowing the observed optical changes to be compared with the technological treatment of the samples. In some investigated specimens, increased photoluminescence intensity was recorded following processing operations. The magnitude of the observed changes varied according to the initial characteristics of the crystals and the processing sequence. These results indicate that mechanical treatment may influence the state or optical response of luminescence-related defect centers. However, changes in photoluminescence intensity should not be treated as directly equivalent to changes in commercial diamond color grade. The two properties are related to optical behavior but require distinct measurements and interpretations. 6. Plastic Deformation and Dislocation Structures One of the central scientific contributions of the original research was the investigation of plastic deformation as a mechanism associated with changes in diamond optical properties. Mechanical processing produces localized contact stresses that may alter the defect structure of a diamond crystal under suitable conditions. The dissertation examined the movement and multiplication of dislocations, the development of dislocation accumulations, and the interaction be
Language: English
Open Access status: green
OpenAlex ID: W7222547110
FWCI:
Cites:
Cited by:
Related to: 10