Work

Solidification, fissuration et refroidissement d'une croûte de corium en situation d'ICB renoyé : modélisation multiphysique et identification des mécanismes de refroidissabilité

Year: 2026
Type: dissertation
Abstract: The data produced and used in this thesis mainly consist of numerical simulation codes and the results obtained from these simulations, stored as text files. They also include post-processing scripts used to analyse these results, as well as LaTeX files used to produce the manuscript. 1.1. Simulation codes and scripts The numerical simulations are performed using codes developed in Python and relying on the LMGC90 software. These codes are used to define the various computational configurations, the thermal and mechanical properties of the materials, the initial and boundary conditions, and the numerical parameters required to run the simulations. The Python scripts include files dedicated to preparing the calculations, such as gen_sample.py, as well as executing them, such as command.py. A large number of simulations were carried out during the thesis, covering different physical configurations. The storage of the various codes is described in Section 2. 1.2. Data obtained from numerical simulations Two main types of data are generated by the simulations performed using LMGC90. The first type consists of text files (.txt) containing, in particular, the time evolution of various physical quantities obtained from the simulations, such as the position of the solidification front, the heat fluxes extracted, the crack density, and the strain energy. These files are generated during simulation runs and can be defined or customised by the user before the calculation starts. They are generally structured in two columns, with the first corresponding to time and the second to the physical quantity of interest. These data are then used to determine various characteristic quantities of the phenomenon under investigation, including the inter-crack spacing, the solidification velocity, the mechanisms associated with solidification, and the Péclet number. The second type of data consists of VTU files (.vtu), which contain spatially distributed fields obtained from the numerical calculations. These files enable the visualisation and analysis of the spatial distribution of physical quantities using ParaView. For three-dimensional simulations, VTU files can also be used to extract geometries for further analyses, particularly to investigate permeability and the spatial distribution of the crack network. 1.3. Post-processing data and scripts Text files (.txt) generated by the simulations are processed using dedicated Python scripts. These scripts are used, in particular, to extract and calculate global quantities from the simulation results. These quantities are then used to conduct parametric studies on the thermal and mechanical properties of the materials. VTU files (.vtu) are also processed using Python scripts, notably with the open-source libraries PoreSpy and OpenPNM. Based on a voxelised representation of the geometry, these tools are used to characterise the transport properties of the pore network, particularly by calculating its permeability. Dedicated image-processing scripts are also used to analyse VTU files generated by three-dimensional simulations. They enable the quantitative characterisation of crack networks by determining various geometrical quantities, such as the average number of sides per block, the mean block area, the distribution of block areas, and their standard deviation. The results obtained from these post-processing operations are primarily stored as text files (.txt). These data are used for sensitivity studies, the analysis of the phenomena under investigation, and the generation of the figures and tables presented in the thesis manuscript. 1.4. Files associated with the production of the manuscript and figures Finally, LaTeX files (.tex) are used to write and format the thesis manuscript and related documents. The figures, tables, and results presented in the manuscript are generated from the numerical simulation data and their post-processing. The LaTeX files constitute the source files of the final document and preserve all the elements required for its compilation and reproduction. They therefore ensure traceability between the simulation results, their representation in figures and tables, and their incorporation into the manuscript. In summary, all data produced and used during this thesis can be grouped into four main categories: Python-based simulation codes using LMGC90; simulation output files in .txt and .vtu formats; Python scripts dedicated to post-processing and analysing the results; and LaTeX (.tex) files used to write and produce the thesis manuscript.
Language: English
Field: Energy
Open Access status: green
OpenAlex ID: W7222957664
Cites:
Cited by:
Related to: 9