Constant-Cutting-Force Circumferential Feed Optimization in Gear Shaping Using an Element-Based Force Model
Year: 2026
Type: article
Abstract: Interstroke fluctuations in the main cutting force in gear shaping cause uneven tool loading and localized overloading. This study develops a stroke-by-stroke circumferential feed optimization method for constant-cutting-force gear shaping. An element-based cutting-force model treats the top and side cutting edges as orthogonal and oblique cutting, respectively, and a reduced-order power-law surrogate between cutting area and force enables rapid feed evaluation. A multi-objective particle swarm optimization (MOPSO) algorithm minimizes the weighted deviation from a target force, the number of effective strokes and the maximum adjacent-stroke force difference, subject to constraints on the force band, feed range, smoothness and interstroke variation. Validated against five repeated experiments, the model gives a root mean square error (RMSE) of 44.8 N over ten representative strokes and a mean absolute percentage error (MAPE) of 1.9% for the seven strokes with a theoretical force above 300 N, with the relative error growing at small uncut chip thickness. The optimized feed reduces the peak-to-valley difference, stroke number and standard deviation by 70.2%, 24.4% and 78.8%, and the measured force stays near-constant, matching theory to an RMSE of 19.65 N and MAPE of 0.69%. The method suppresses periodic force fluctuation, improves load uniformity and raises machining efficiency.
Source: Machines
Authors: Fucong Liu(Conceptualization, Funding acquisition, Methodology, Project administration, Supervision), Min Li(Conceptualization, Data curation, Investigation, Methodology, Software, Validation, Visualization, Writing – original draft, Writing – review & editing), Jianhao Ning(Conceptualization, Data curation, Formal analysis, Methodology, Software, Validation), Peng Wang(Funding acquisition, Project administration, Software), Baokaidi Tian(Data curation, Project administration, Visualization), Lei Yu(Project administration, Software, Supervision), Faqiang Wen(Data curation, Software, Validation), Tianxiang Yu(Resources, Supervision, Visualization), Sai Lou(Funding acquisition, Project administration, Resources)
Institution: Tianjin University of Technology and Education
Language: English
Subfield: Mechanical Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $2,896
OpenAlex ID: W7223088954
