Work

UPAYA MINIMASI BIAYA KERUGIAN KUALITAS MENGGUNAKAN METODE FAILURE MODE AND EFFECT ANALYSIS (FMEA) DAN TAGUCHI LOSS FUNCTION (Studi Kasus: Industri Paving Stone UD. Amino)

Year: 2026
Type: dissertation
Abstract: UD. Amino is a small and medium enterprise in Junrejo District, Batu City, producing concrete paving blocks, but still faces an average product defect rate of 5% per day in the form of cracked paving, without a systematic quality loss calculation. This study aims to identify the dominant failure modes causing cracking defects, quantify the financial quality loss, and formulate production process improvement recommendations. A quantitative approach was applied by integrating Failure Mode and Effect Analysis (FMEA) to prioritize failure modes based on the Risk Priority Number (RPN), and the Taguchi Loss Function with a Smaller-the-Better characteristic to calculate quality loss per unit. Results show 14 failure modes from six causal factors, with three top priorities: unstandardized water ratio (RPN 392), loosened compactor hydraulic cable (RPN 336), and inconsistent cement-sand ratio (RPN 294). The Taguchi calculation produced a loss coefficient of Rp340,800 and a quality loss per unit of Rp253.66, with a total loss of Rp511,532 over 28 days of observation, potentially reaching ±Rp6,583,536 annually if left unaddressed. Improvement recommendations were formulated into three Standard Operating Procedures and three checklist forms to standardize the production process and reduce quality loss at UD. Amino.
Author: Putri, Tiara Sabrina Aqila
Language: Indonesian
Open Access status: green
OpenAlex ID: W7224063152
Cites: 6
Cited by:
Related to: 10