Modeling surface integrity during hard machining considering tribological interactions
Year: 2026
Type: article
Abstract: Surface integrity governs the process–structure–property–performance relationships of machined components. In this study, a microstructure-informed, thermo-viscoplastic, stress-state-dependent, coupled damage mechanics model is implemented in both ABAQUS/Explicit (v2021) and MSC Marc/Implicit (v2020) to predict modifications of the workpiece rim zone using the Coupled-Eulerian–Lagrangian and Updated-Lagrangian approaches, respectively. The constitutive material model is further coupled with a tool wear model based on node shifting in MSC Marc to account for tribological effects on surface integrity during hard machining. The numerical results are validated against experimental measurements of cutting forces, chip geometry, grain size evolution, white layer thickness, and residual stress depth profiles. The maximum deviation in predicted cutting forces is below 18%, while the maximum deviation in predicted white layer thickness is approximately 0.5 μ , corresponding to half the element size. The predicted residual stress profiles show good agreement with experimental measurements perpendicular to the cutting direction ( R 2 = 0.9298 ) , whereas the agreement is considerably poorer in the cutting direction ( R 2 = 0.1619 ) . The simulations reveal that tool wear increases the temperature in the machined rim zone, while reducing the extent of plastic deformation. Despite the increased thermal loading, a worn cutting tool produces a thinner mechanically induced dynamically recrystallized layer compared with an unworn tool. These results demonstrate the importance of explicitly considering tool wear and the associated tribological effects when predicting surface integrity during hard machining.
Source: Results in Engineering
Author: Berk Tekkaya
Institution: RWTH Aachen University
Language: English
Subfield: Mechanical Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $1,940
OpenAlex ID: W7225076210
