Orthogonal Input Signal Routing for Class-C-Free GaN MMIC Doherty Power Amplifiers
Year: 2026
Type: article
Abstract: Conventional Doherty power amplifiers (DPAs) typically employ a Class-C-biased peaking amplifier to realize the delayed activation required for load modulation. The strongly nonlinear conduction behavior associated with Class-C operation introduces gain variation and intermodulation distortion, degrading the linearity performance of the DPA. This article proposes an orthogonal input signal routing (OISR) technique that decouples peaking-amplifier activation from nonlinear device biasing by implementing power-dependent activation at the RF input excitation domain. The OISR dynamically redistributes the input signal between two orthogonal excitation paths as the drive level increases, allowing both carrier and peaking amplifiers to operate under Class-AB/B bias while preserving the required Doherty load-modulation behavior. As a proof of concept, a 12-GHz OISR-based DPA is implemented using a 0.12-$\mu $m gallium nitride (GaN) high-electron-mobility transistor (HEMT) monolithic microwave integrated circuit (MMIC) process. The fabricated amplifier achieves 36.48 dBm saturated output power, 38.23% peak power-added efficiency (PAE), and 24.08% PAE at 6-dB output power back-off (PBO). Under a 100-MHz 5G NR 64-QAM signal with an 8.1-dB peak-to-average power ratio (PAPR), it achieves an adjacent channel leakage ratio (ACLR) of −43.43 dBc and an error vector magnitude (EVM) of 2.55% without digital predistortion (DPD), demonstrating high intrinsic linearity together with efficient Doherty operation.
Authors: Haoyang Jia, Ruijia Liu, Lin Qi, Anding Zhu
Institution: University College Dublin
Language: English
Subfield: Electrical and Electronic Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: hybrid
Estimated APC paid: $2,645
OpenAlex ID: W7225308886
