Reducing the cost of solid sorbent direct air carbon capture by recovering waste heat from water electrolysis under Nordic conditions
Year: 2026
Type: article
Abstract: Reducing the atmospheric CO 2 concentration to a sustainable level requires large-scale carbon dioxide removal through direct air capture (DAC). DAC is a heat-intensive process, and waste heat recovery to supply its heat demand has substantial potential to reduce the levelized cost of DAC (LCODAC). This study determines the techno-economic potential of recovering low-temperature waste heat (70°C) from an off-grid electrolyzer plant for use in a solid-sorbent DAC plant requiring heat at 80°C–120°C for desorption. The waste heat recovery system, comprising heat pumps and a heat storage, and the DAC plant are dimensioned to minimize the LCODAC based on optimization at an hourly level, and a comparison with an electric-boiler-based heat supply is performed. It was found that the 100 MW e electrolyzer plant producing 6.3 kt/a of H 2 can provide heat for a DAC plant capturing up to 27 kt/a of CO 2 under Nordic conditions, where low ambient temperatures are beneficial for the solid DAC process, except for subzero temperatures. The LCODAC can be reduced by 21%–36% when a waste-heat-based heat supply is used instead of an electric boiler. Increasing the desorption temperature significantly reduces the LCODAC, even though the cost of heat supply increases due to the decreasing coefficient of performance of the heat pumps. Waste-heat-based heat supply for DAC can benefit the electricity system, as it reduces the primary energy demand by about 62 % and the peak electrical power by 57 % compared with an electric boiler.
Source: Energy
Language: English
Subfield: Filtration and Separation
Field: Chemical Engineering
Domain: Physical Sciences
Open Access status: hybrid
Estimated APC paid: $4,260
OpenAlex ID: W7225465359
