Removal of Cu(II) from Aqueous Medium Using Chitosan/nSiO2 Nanocomposite: Fixed-Bed Adsorption Study and Modeling
Year: 2026
Type: article
Abstract: The study aims to use Chitosan/nSiO2 Nanocomposite (CSNC) as an adsorbent to eliminate toxic Cu(II) ions from its aqueous solution using a fixed-bed continuous column system. nSiO2 was synthesized from rice husk ash. The adsorption investigations were performed at optimum pH 6.5 under different operating conditions, such as bed height (3–7 cm), influent flow rates (30–50 mL min−1), and influent Cu(II) concentration (10–30 mg L−1). The removal of Cu(II) was increased with the column’s bed depth but reduced with flow rate and adsorbate concentration. Experimental observations were employed to study seven kinetic models. The Thomas model was confirmed to be the best-fit kinetic model corresponding to 3 cm bed height, a column diameter of 1.5 cm, 30 mL min−1 flow rate, and an initial metal concentration of 30 mgL−1. A regeneration study and scale-up design were also reported. MLR (R2 > 0.98) and GA techniques (R2 = 1) were also applied to forecast the elimination of Cu(II). The performance of the prepared nanocomposite adsorbent was evaluated on a laboratory scale for removing Cu(II) from synthetic wastewater. This study integrates sustainability and circular economy principles in the application of adsorbents by focusing on their synthesis, utilization in fixed-bed continuous column systems, regeneration, and safe disposal.
Source: Polymers
Institution: University of Calcutta
Language: English
Subfield: Water Science and Technology
Field: Environmental Science
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $3,258
OpenAlex ID: W7225631552
FWCI:
Cites:
Cited by:
Related to: