Work

Biofuel Conversion from Waste Cooking Oil Using Ni-Cu Catalysts Supported on Mesoporous Silica Synthesized via Acidic CTAB-P123 Templating

Year: 2026
Type: article
Abstract: This study investigated the effect of acidic synthesis pH (pH of 1, 3, and 6) on the preparation of mesoporous silica supports for Ni-Cu catalysts used in the hydrocracking of waste cooking oil (WCO) into biofuel. The silica supports were synthesized using a reflux method with CTAB and Pluronic P123 as dual templates, followed by impregnation with 5% Ni-Cu metals at a molar ratio of 3:1. Gas sorption analysis (GSA) revealed that the catalyst synthesized at pH of 6 (K-6) exhibited the highest specific surface area (413.44 m²/g) and apparent gravimetric ammonia uptake (7.63 mmol/g). X-ray diffraction (XRD) analysis confirmed the amorphous structure of the silica support and the presence of metallic Ni and Cu phases, while Fourier-transform infrared (FTIR) spectroscopy identified characteristic surface hydroxyl and Si-O-Si vibrational bands. Hydrocracking was conducted at a catalyst temperature of 450 °C and a feed vaporization temperature of 500 °C, using a catalyst-to-feed mass ratio of 1:100. Product composition was evaluated using gas chromatography–mass spectrometry (GC-MS). All three catalysts achieved 100% total conversion, with K-6 exhibiting the highest selectivity toward the biofuel fraction (78.99%). These findings highlight the potential of pH-controlled Ni-Cu/mesoporous silica catalysts for biofuel production from WCO and demonstrate the relationship between catalyst textural properties and biofuel selectivity under the investigated reaction conditions. Copyright © 2027 by Authors, Published by BCREC Publishing Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).
Language: English
Subfield: Fuel Technology
Field: Energy
Open Access status: gold
Estimated APC paid: $150
OpenAlex ID: W7225650225
FWCI:
Cites: 26
Cited by:
Related to: 10