Work

Water-Assisted Cold Sintering of Hydroxyapatite: Effects of Pressure and Temperature on Densification and Microstructure

Year: 2026
Type: article
Abstract: Achieving substantial hydroxyapatite (HAp) consolidation at low temperatures without introducing reactive sintering additives remains an important challenge in ceramic processing. This study investigates water-assisted cold sintering as a straightforward route for consolidating wet-chemically synthesized HAp while preserving its crystalline structure. Using 10 wt.% water as the sole transient liquid phase, specimens were processed at 175–225 ∘C. under 400–500 MPa for 30 min. Densification, porosity, microstructure, elemental distribution, and phase composition were systematically evaluated. Substantial consolidation was achieved under all investigated conditions, with relative densities exceeding 80% and the highest mean value (85.91%) obtained at 400 MPa and 225 ∘C. Microstructural observations revealed a comparatively more homogeneous and continuous fracture surface under this condition, while elemental mapping indicated no pronounced segregation. X-ray diffraction confirmed HAp as the predominant detectable crystalline phase, with nanometric coherent diffraction domains. Notably, increasing pressure did not consistently enhance densification, and no statistically significant differences were detected among processing conditions. These findings demonstrate the potential of water-assisted cold sintering for low-temperature HAp consolidation and highlight the importance of considering powder characteristics and processing conditions together rather than relying on pressure alone.
Language: English
Open Access status: diamond
OpenAlex ID: W7225865718
FWCI:
Cites:
Cited by:
Related to: 10