Vacuum brazing of binder jetting structures for the assembly of complex internal channels and gyroid lattices
Year: 2026
Type: preprint
Abstract: Binder Jetting (BJ) has emerged as a promising additive manufacturing technology for producing complex metallic components, including lattice structures such as gyroids. Compared to other additive processes, BJ offers advantages in terms of scalability, material versatility, and the ability to fabricate intricate geometries without the need for support structures. However, significant challenges remain in the production of components with closely spaced internal channels and enclosed cavities, particularly due to distortions during sintering and difficulties associated with powder removal. This work proposes an alternative manufacturing strategy based on the assembly of BJ-fabricated subcomponents through vacuum brazing. The concept involves producing open structures that facilitate depowering and sintering, followed by their subsequent joining to form sealed internal channels. This approach enables the fabrication of geometries that would otherwise be unfeasible as monolithic parts, while minimizing deformation. Experimental investigations were carried out on representative geometries, including tube-to-tube joints and gyroid lattice cubes joined to plates. Components were fabricated using a metallic BJ process and subsequently brazed in a vacuum furnace. Different filler metals, including Ni-based alloys, active brazing alloys, and pure copper, were evaluated. Brazing parameters were defined, and the resulting joints were characterized by macroscopic analysis. The results demonstrate that high-quality joints can be achieved using vacuum brazing, with differences observed depending on the filler material. The study highlights key aspects related to joint integrity, defect formation, and filler metal behavior within complex geometries. Overall, the findings confirm the feasibility of vacuum brazing as a post-processing technique for assembling Binder Jetting components. This approach opens new possibilities for the design and manufacture of advanced structures with complex internal channels and gyroid architectures, particularly in applications where conventional manufacturing routes are limited.
Source: Research Square
Authors: Bernaitz Arregi, Garbiñe Atxaga, Isaac Dávila
Institution: Tecnalia
Language: English
Subfield: Mechanical Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: green
OpenAlex ID: W7225866172
