Year: 2026
Type: article
Abstract: Objective. The objective of this work is to derive governing equations for the analysis of three-layer cylindrical shells under axisymmetric loading (hydrostatic pressure), accounting for the viscoelastic properties of the middle layer’s material. The study examines the stress-strain state of a three-layer cylindrical shell with specific boundary conditions: the lower edge is pinned (hinged support), while the upper edge is free. Method. Regarding the methodology, a linear approximation of the first time derivative (Runge-Kutta method) was employed to determine creep strains. To verify the solution, a calculation was performed for a three-layer cylindrical shell made of polyurethane foam, using different boundary conditions. Result. As a result, governing equations for the analysis of shells under axisymmetric loading -incorporating creep -were derived. The problem is reduced to a system of two ordinary differential equations for the functions 𝑤 and 𝜑. The solution is obtained numerically using the finite-difference method combined with Euler’s method within the MATLAB software environment. The nonlinear Maxwell-Gurevich equation is adopted as the constitutive equation (equation of state). A program was developed in MATLAB that allows for the variation of input data and generates plots showing the dependence of displacements and stresses on time. It was determined that the creep of the middle layer has a beneficial effect on the stress-strain state of the structure under consideration. Conclusion. The proposed approach is applicable to the analysis of the stress-strain state and the assessment of the load-bearing capacity not only of three-layer polymer and composite structures but also of reinforced concrete shells. There are no restrictions on the types of boundary conditions or loading schemes; furthermore, the structural elements can be composed of materials ranging from construction polymers and composites to concrete. Incorporating reinforced concrete as a material requires the inclusion of its specific properties into the constitutive relations: a nonlinear stressstrain diagram, differing elastic moduli in tension and compression, crack formation in the tension zone, as well as creep and shrinkage. This leads to a physically nonlinear problem formulation in which the governing equations retain the structure of a system of two ordinary differential equations, though their coefficients become dependent on the stress level and loading history. This does not alter the overall numerical solution scheme, which continues to employ the finite-difference method in conjunction with Euler’s method (applied with respect to a loading parameter or time).
Language: English
Subfield: Mechanics of Materials
Field: Engineering
Domain: Physical Sciences
Open Access status: diamond
OpenAlex ID: W7225874863
