Work

Joint Filtering, Dead-Time, and Loss Bounds on Switching Frequency in Class-D Power Stages

Year: 2026
Type: article
Abstract: Selecting the switching (carrier) frequency of a Class-D power stage couples reconstruction-filter attenuation, dead-time distortion, pulse-width headroom, and switching loss. This paper derives closed-form joint bounds on the carrier of a full-bridge stage and, from them, sufficient carrier-independent screening conditions on the blanking interval, shortest pulse, and switching energy for a specification and filter order. An extended commutation model links dead-time distortion to switch-node charge and inductor ripple, defining when the square-wave formula holds; a current-dependent switching-energy model supplies the loss bound. Switching-level simulations with silicon and gallium nitride (GaN) datasheet parameters and resistive and loudspeaker loads verify the predictions: at modulation index 0.8, the extended model agrees within 7% for blanking above 1%, whereas the square-wave formula overestimates distortion by 30–51% at 2% blanking. For a 20 kHz band with 1 dB passband and 40 dB carrier attenuation, a second-order filter requires at least 280 kHz (347 kHz with tolerances and guard band), limiting the effective blanking to 71 ns (58 ns) at a 2% allocation; the modeled Zobel-compensated loudspeaker raises the bound to 502 kHz. Under these second-order targets, the 25–40 kHz carriers and 660 ns transition interval (taken as blanking) measured on a 14 V amplifier would support only about 2 kHz of bandwidth.
Source: Electronics
Institution: Najran University
Language: English
Open Access status: gold
Estimated APC paid: $2,896
OpenAlex ID: W7225875647
FWCI:
Cites: 52
Cited by:
Related to: 10