Work

In situ monitoring of Pb(II) using Pb(II) IIPs and potentiometric method equipped with cost-free VLC communication system

Year: 2026
Type: preprint
Abstract: Heavy metals such as lead (Pb) pose serious health risks due to their bioaccumulation in the human body, while effective in situ monitoring systems for Pb(II) detection remain limited, especially in Indonesia. This study developed a Pb(II) PI–SPI sensor based on Pb(II) ion-imprinted polymers (IIPs) combined with a simple potentiometric system and bidirectional Visible Light Communication (VLC) technology. The system enables real-time Pb(II) measurement up to 100 m away across aquatic environments, with direct data transmission free from internet or data fees. Application in Teluk Seruo Lake, Indonesia, showed that Pb(II) concentration obtained from steady-state analysis using Boltzmann fitting deviated only 6.42% from the analytical flame AAS result. The steady-state Pb(II) concentration was 38.58 ± 1.45 ppm, while data transmitted via VLC showed an average error of 5.17%. Although the sensor required approximately 12 minutes to reach steady state, it remains faster and more practical than conventional laboratory analysis for field applications. The calibration curve exhibited good linearity (R² = 0.98045) within 0.1–1 ppm, and comparison with extrapolated non-linear (Boltzmann) fitting confirmed that the linear regression method remains valid for higher concentration measurements. The detected Pb(II) concentration in Teluk Seruo was far exceeded both national and World Health Organization (WHO) limits (0.03 and 0.01 ppm), emphasizing the urgent need for continuous monitoring and remediation of heavy metal contamination in aquatic ecosystems.
Language: English
Field: Chemistry
Open Access status: green
OpenAlex ID: W7225880696
Cites: 46
Cited by:
Related to: 10