Experimental study of flame characteristics of methane diffusion combustion with metal fiber burner under O₂/CO₂ oxy-fuel
Year: 2026
Type: preprint
Abstract: O₂/CO₂ oxy-fuel combustion can produce CO₂-rich flue gas and suppress nitrogen-oxide formation, but the high heat capacity, infrared activity, and chemical participation of CO₂ can simultaneously alter flame stabilization and CO burnout. Methane free diffusion flames and flames formed around a vertical cylindrical metal fiber burner were therefore examined in an O₂/CO₂ coflow under identical operating boundaries. The total coflow rate was fixed at 20 L/min, the oxygen mole fraction was varied from 21% to 35%, and the methane flow rate was 5–20 L/min. Visible and infrared imaging, fixed-height thermocouple measurements, radiative heat-flux measurements, and dry-basis CO/NOx analysis were combined to establish a structure-thermal-radiation-emission relationship. The metal fiber burner redistributed methane through its porous sidewall and formed a coupled near-wall surface-combustion region and upper thermal plume. At high load, the 13–29 cm region approached approximately 800°C. Radiative heat flux was controlled mainly by methane flow rate, increasing from about 35–50 W/m² at 5 L/min to 240–300 W/m² at 20 L/min. Oxygen enrichment promoted CO post-oxidation: for the metal fiber burner, CO decreased from approximately 315 to 240 ppm at 5 L/min and from 165 to 45 ppm at 10 L/min. At 15–20 L/min, CO fell to roughly 7–31 ppm. NOx remained approximately 1.5–4.8 ppm across most conditions. The results identify low-load CO burnout, rather than NOx, as the principal operating constraint for CO₂-diluted metal fiber combustion and provide quantitative guidance for low-NOx, carbon-capture-compatible burner design.
Source: Research Square
Authors: Yujie Lin, Chang Qi, Chen Kuang, Guanlin Peng
Language: English
Subfield: Computational Mechanics
Field: Engineering
Domain: Physical Sciences
Open Access status: green
OpenAlex ID: W7225887035
