Work

Comparative Structural Response of Conventional and Hybrid Seat–Handrail Systems in a Low-Floor Urban Bus

Year: 2026
Type: article
Abstract: Integrating passenger seats with the load-bearing framework of low-floor urban buses changes seat-support connectivity and motivates comparison of alternative structural layouts. This study compares conventional floor-mounted seats with a hybrid seat–handrail system connected to both the floor and roof. Finite element analyses were performed using Ansys Explicit Dynamics for a simplified frontal impact at 30 km/h and Ansys Transient Structural for separate seat-back loading based on force prescriptions from UN Regulation No. 80 (R80). Tubular members were represented by beam elements, with common prescribed loading and boundary conditions used for each configuration pair. In the baseline force-based impact simulations, the hybrid configuration reduced peak seat-back displacements by 11.44% for the 1st seat and 1.90% for the 4th seat. The simulated peak structural backrest acceleration decreased from 10.2 g to 8.6 g. Under prescribed seat-back loading, peak Y-axis displacements of the upper backrest crossbars decreased from 518.71–518.72 mm to 51.12–55.99 mm, representing reductions of approximately 90% across the four seats. The comparison demonstrates that the structural influence of seat–handrail integration is strongly dependent on the loading scenario and seat location. These findings support further development of integrated seat-support layouts and investigation of attachment stiffness and load transfer.
Language: English
Open Access status: gold
Estimated APC paid: $2,896
OpenAlex ID: W7225894058
FWCI:
Cites: 31
Cited by:
Related to: 10