Work

Coupled electromagnetic–thermal CFD modeling of microwave-heated catalytic reactor for dry methane reforming

Year: 2026
Type: article
Abstract: Electrification of highly endothermic processes, such as methane reforming, represents a key strategy for the decarbonization of the industrial sector. Among the available electrification technologies, microwave (MW) heating has emerged as a promising approach to enhance both the sustainability and efficiency of endothermic reactors. This work presents the development of a CFD model aimed at investigating and improving the understanding of microwave-assisted heating applied to highly endothermic reactions, using dry methane reforming (DMR) as a case study. Dedicated experiments were conducted in a laboratory-scale MW reactor operating at 2.45 GHz. A Ni/CeZrO₂ catalyst deposited on a SiC tube suitable for MW heating was employed. The model incorporates the full geometry of the experimental setup, including the microwave cavity, waveguide, impedance tuner, sliding short circuit, and TE₁₀ excitation port. It was successfully validated against experimental data in terms of electromagnetic field distribution, temperature profiles, methane conversion, and hydrogen selectivity. The results reveal that microwave heating leads to non-uniform temperature distributions, with higher temperatures occurring in regions of elevated electric field intensity. However, simulations of an insulated reactor configuration show a significant improvement in temperature uniformity and a power recovery of 12.5%, due to the high thermal conductivity of the SiC support. Thus, the results of this study can be used to properly design catalysts and operating conditions in microwave heated reactors, free from hot-spots and major temperature gradients.
Language: English
Field: Chemistry
Open Access status: hybrid
Estimated APC paid: $4,830
OpenAlex ID: W7225907655
FWCI:
Cites: 38
Cited by:
Related to: 10