Non-additive pressure-load response to edge shaping and cavity closure on an idealised twin-girder bridge deck
Year: 2026
Type: preprint
Abstract: Geometric modifications can reduce wind loads on bluff bridge decks, but their combined effect may differ from the sum of the individual effects because local changes can alter separation and pressure recovery on distant surfaces. We study the interactions between edge shaping and cavity closure on an idealised twin-girder bridge deck using two-dimensional unsteady Reynolds-averaged Navier–Stokes simulations with the k–ω shear-stress-transport model at a depth-based Reynolds number of 1.6 × 10⁷. Two complete 2 × 2 factorial sets separate main effects from interactions. Surface-pressure integrals give the regional contributions, and the summed pressure forces are checked against the recorded pressure forces. Numerical allowances are reported separately from model error. The streamlined section carries 54% less drag than the bare one, with a numerical allowance of ±1.1 percentage points. The two edges do not act independently. On the closed section with inclined edges, curving one edge saves only about 5% of the drag, but curving both saves 53%, and 81% of that saving comes from their interaction. Almost all of this interaction acts on the trailing outer face. Opening the cavity affects lift in opposite directions for the two edge shapes: it raises lift when the edges are inclined and lowers it when they are curved, through changes in the top and underside pressures. The results show how edge and cavity changes act together and where their pressure contributions arise within the numerical model, although discrepancies in benchmark loads and reattachment limit predictions of physical load reductions.
Source: Research Square
Authors: Mingjin Lou, Yize Zhang, Ze Tao
Language: English
Subfield: Computational Mechanics
Field: Engineering
Domain: Physical Sciences
Open Access status: green
OpenAlex ID: W7225908636
