Improvement in stamping formability of Ti/Al multilayered composites via annealing-induced interface modification
Year: 2026
Type: preprint
Abstract: Ti/Al/Ti/Al/Ti layered metal composites (LMCs) were obtained via hot-pressing and hot-rolling, followed by annealing at 550 ℃ for different times to regulate the interface. The effect of Ti/Al interfacial evolution on the mechanical behavior and stamping formability of the LMCs was investigated. As annealing proceeded, the Ti/Al interface bonding strength exhibited a rise followed by a decline, reaching a peak of 8.73 N/mm at an annealing duration of 1 h. The strength of the LMCs decreased, whereas elongation (EL) increased first and then decreased, reaching the maximum of 7.15% after 1 h of annealing, which was closely related to superior interfacial bonding. The enhanced interfacial bonding improved deformation compatibility among adjacent layers, thereby delaying premature failure of the less ductile Al layer and increasing the overall EL. The optimal stamping formability was obtained in the LMCs annealed for 1 h, as the weakened basal texture of the base metal induced a lower yield-to-tensile strength ratio (σs/σb) and a larger strain hardening exponent (n), endowing the LMCs with a longer uniform plastic deformation and higher strain hardening resistance. During stamping, localized and stable interfacial delamination promoted crack deflection and blunting and contributed to energy dissipation, thereby improving the stamping formability of the LMCs, whereas extensive and unstable wedge-shaped delamination provided a rapid interfacial crack-propagation path and accelerated failure.
Source: Research Square
Language: English
Subfield: Mechanical Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: green
OpenAlex ID: W7225911351
