Work

Effects of local thermal non-equilibrium on parameter estimation from thermal single-well push-pull tests in fracture-matrix systems

Year: 2026
Type: article
Abstract: Thermal single-well push-pull (SWPP) tests are widely used to estimate parameters governing subsurface heat transport. However, most existing SWPP models rely on the local thermal equilibrium (LTE) assumption, which neglects temperature differences between the fluid and solid phases during heat transport. Here we develop a new thermal SWPP model for fracture-matrix systems that explicitly incorporates local thermal non-equilibrium (LTNE), wellbore fluid mixing and fracture-matrix heat exchange. Simulations show that the temperature difference between the fluid and solid phases increases as LTNE effects become stronger. This difference is positive during injection and early extraction, but becomes negative during the chasing phase and late extraction. When LTNE effects are strong, ignoring LTNE leads to a robust overestimation of thermal dispersivity during parameter estimation, whereas the porosity estimate is biased with an indefinite sign owing to the strong compensation between thermal dispersivity and porosity. In contrast, thermal breakthrough curves in the wellbore during injection and chasing are only weakly affected by LTNE. When fracture-matrix heat exchange is described using Newton’s law of cooling, increasing the heat transfer coefficient reduces the peak of the thermal breakthrough curve during extraction. In addition, once formulated consistently with the depth-averaged model, the classical averaged volumetric sink/source term corresponds to the perfect-contact limit of fracture-matrix heat exchange and therefore gives its upper bound, whereas the Newton’s-law-of-cooling formulation with a finite heat transfer coefficient yields weaker exchange. These results show that LTNE and fracture-matrix heat exchange should be explicitly considered to improve the physical realism and reliability of thermal SWPP interpretation in fracture-matrix geothermal systems. The model is verified against a semi-analytical solution and benchmarked against COMSOL Multiphysics under true LTNE conditions. The proposed model targets fractures filled with coarse sediments or breccia, such as fault zones, karstified channels and gravel-packed intervals; for typical EGS microfractures with millimeter-scale apertures and fine fillings, the LTNE effect is negligible and the LTE assumption is adequate.
Language: English
Open Access status: gold
Estimated APC paid: $2,690
OpenAlex ID: W7225913910
FWCI:
Cites: 4
Cited by:
Related to: 10