Work

Comparative Evaluation of Technologies for Forming Anticorrosion Coatings on Austenitic Stainless Steels for Energy Equipment Based on Operational and Environmental Criteria

Year: 2026
Type: article
Abstract: The paper systematizes and comparatively analyzes modern technologies for forming anticorrosion coatings on austenitic stainless steels used in energy equipment. The technologies considered include electrodeposition, laser cladding, high-velocity oxy-fuel spraying, cold spray, diffusion aluminizing, physical vapor deposition, atomic layer deposition, and sol-gel processing. The comparison is based on interconnected operational, structural, and environmental criteria, including the nature of the coating/substrate interface, defectiveness and phase composition, mechanisms of protective oxide formation, stability under corrosive and thermal loading, and material and energy flows associated with coating production. Based on the results of the generalization, a functional classification of protective coatings was proposed according to the dominant factor of loss of protective ability, which allowed us to distinguish defect-controlled, porosity-controlled, diffusion-reserve, metallurgically bound, and reaction-converted systems. It is shown that coating thickness cannot be used as a universal measure of protective efficiency. For electrodeposited systems, composition, dispersion state, and defect structure are critical; for laser-clad coatings, metallurgical bonding and thermal stability dominate; for HVOF and cold-sprayed coatings, density, interparticle bonding, and residual porosity are decisive; for diffusion aluminide systems, long-term performance is controlled by the available Al reservoir and its depletion kinetics; and for PVD and ALD coatings, the integrity of the thin barrier layer is essential. Environmentally significant flows differ substantially among the technologies. Electrodeposition involves electrolytes, rinse water, and metal-containing wastewater; thermal and kinetic spraying processes consume powders and process gases; laser and vacuum methods are associated with energy consumption, process gases, and specialized materials; and diffusion processes require prolonged high-temperature treatment. The analysis shows that technologies should not be formally ranked by environmental performance without a common functional unit and consistent life-cycle boundaries. Promising directions include controlling coating defectiveness and phase stability, applying non-stationary electrodeposition modes, developing multicomponent metal-oxide systems, increasing material utilization efficiency, and partially closing material and wastewater loops.
Language: English
Open Access status: diamond
OpenAlex ID: W7225916935
FWCI:
Cites: 52
Cited by:
Related to: 10