Friction Coefficients Characteristic of Biodegradable Lubricants Based on Coconut Oil with the Addition of Beeswax
Year: 2026
Type: article
Abstract: Coconut oil-based lubricants are currently commonly used as an alternative to environmentally friendly lubricants because they are biodegradable and have a low environmental pollution impact. However, coconut oil has less than optimal lubrication capabilities compared to mineral lubricants, so the addition of beeswax additives is needed to improve its tribological characteristics. This study specifically aims to analyze the direct effect of adding varying amounts of beeswax on the performance and efficiency of coconut oil lubricants. The friction coefficient tested using pin on disc methods according to ASM G99 with the pin-on-disc tribological testing were 7075 aluminium pins with a standard diameter of 6 mm and a height of 20 mm. The disc rotation speed was 125 rpm, with a track diameter of 37 mm. The disc was made from hardened VCN steel. The operational load variations applied during these pin-on-disc simulations were set at 800 grams, 1000 grams, and 1200 grams. The lubricant compositions of beeswax were 25 grams, 30 grams, and 35 grams. The experimental results explicitly showed that the addition of 35 grams of beeswax yielded the most significant contribution to minimizing friction. This specific formulation was able to drastically reduce the friction coefficient from an initial 0.25 to 0.12, or a decrease of 52%.
Institution: State University of Malang
Language: English
Subfield: Mechanical Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: diamond
Funder: Universitas Negeri Malang
OpenAlex ID: W7225919865
