Work

Integrated Thermodynamic–Mechanical Analysis of a Combined ORC– VCC Refrigeration System Using an Expander–Compressor Unit-Based Piston for Waste-Heat Utilization

Year: 2026
Type: preprint
Abstract: This study presents a theoretical analysis of a directly coupled Organic Rankine Cycle–vapor-compression cycle (ORC–VCC), which is an alternative thermally driven refrigeration system. This system combines an ORC with a VCC via a free-piston expander-compressor unit (ECU). The ECU directly transfers mechanical work to a piston compressor without an intermediate generator, motor, or shaft train. A coupled thermodynamic–mechanical model is developed to assess piston force balance, swept volume, working-fluid mass flow rate, compressor work, cooling capacity, heat input, and system coefficient of performance (COP). Seven refrigerants, R134a, R22, R32, R410A, R1233zd(E), R1336mzz(E) and R1234yf are compared over generator temperatures of 60–90°C, condenser temperatures of 30–45°C, and evaporator temperatures of − 10 to 10°C. The results show that increasing generator or condenser temperature reduces COP, whereas increasing evaporator temperature and useful preheating improves COP. Mechanical parameters primarily scale cooling capacity because cooling output and required input increase in broadly similar proportions; consequently, they have little influence on COP under the idealized assumptions. R22 and R32 provide the highest calculated performance in most cases, while low-global-warming-potential fluids offer environmental advantages but lower predicted capacity under the investigated conditions. The findings establish design relationships for matching thermodynamic states to free-piston geometry and identify heat recovery, fluid selection, and operating temperatures as the principal levers for improving system-level efficiency.
Language: English
Open Access status: green
OpenAlex ID: W7225984226
Cites: 31
Cited by:
Related to: 10