Work

Design and characteristics improvement of GaN/Ga₂O₃ SACM-APDs featuring a p-type GaN multiplication layer for solar-blind single-photon detection

Year: 2026
Type: article
Abstract: In this paper, a separate absorption, charge, and multiplication avalanche photodiode (SACM-APD) based on a GaN/Ga₂O₃ heterostructure is designed and optimized for high-performance ultraviolet single-photon detection. First, we evaluate a conventional SACM architecture using an n − -type Gallium nitride (GaN) multiplication layer and a n + -type gallium oxide (Ga₂O₃) charge layer and an n − -type Ga₂O₃ absorption layer as a baseline. To improve carrier-multiplication dynamics and mitigate high-field heterojunction interface issues, we propose a novel structurally modified APD that integrates a p − -type GaN multiplication layer, an n + -type GaN charge layer, and an n − -type Ga₂O₃ absorption layer. In photodetectors exhibiting low quantum efficiency at zero bias, calculating the gain based on the zero-bias photocurrent often leads to overestimation artifacts. To prevent this error and provide a rigorous physical assessment, the avalanche gain in this study is calculated relative to the average unmultiplied photocurrent in the pre-avalanche region. Simulation results demonstrate that the proposed structural modifications significantly enhance device performance. Compared to the conventional baseline, the proposed SACM-APD achieves a 93.7% enhancement in avalanche gain, increasing from 1.6 × 10 6 to 3.1 × 10 6 approximately, which corresponds to a multiplied responsivity of 1.603 × 10 6 A/W under 254 nm back-illumination. Furthermore, the operating breakdown voltage is favorably reduced from 55.55 V in the baseline to 52.77 V in the proposed structure. These findings highlight the robust potential of the proposed architecture for next-generation, high-gain single-photon avalanche detectors (SPADs).
Language: English
Open Access status: gold
Estimated APC paid: $2,690
OpenAlex ID: W7225990452
FWCI:
Cites:
Cited by:
Related to: 10