A Pressure-Stabilized Allman88 T3 Triangle for Nearly Incompressible Plane Strain: Comparison with the Allman88 MINI Element
Year: 2026
Type: article
Abstract: This report evaluates a three-vertex Allman88 triangle with cubic displacement interpolation,vertex drilling coordinates, and continuous linear pressure. An elementwise projection ontoconstant pressure supplies explicit stabilization. The comparator is the published Allman88 MINIT3, which uses two local displacement bubble amplitudes eliminated by static condensation. Theformulations share the same constitutive law, physical meshes, load definitions, and displacementtrace treatment. The study separates pure bending, mesh distortion, and near-incompressiblepressure behavior and examines the influence of the stabilization parameter. At the defaultparameter, both mixed methods give nearly the same refined pure-bending displacement. Theprojection substantially degrades the manufactured response when the nonconstant exact pressure,scaled by 𝜇, grows with the bulk-to-shear modulus ratio 𝜅/𝜇, despite controlling weak pressuremodes on the sampled meshes. On the 2,048-triangle M1 mesh at 𝜈 = 0.4999, the pressurestabilizedelement with 𝜏 = 1 gave an 𝐿2 displacement error of 2.16004, about 144 times theAllman88 MINI error of 0.0149614. The results identify where the simpler element is useful andwhere the bubble formulation is preferable.
Author: O'Reilly, William R
Language: English
Subfield: Computational Mechanics
Field: Engineering
Domain: Physical Sciences
Open Access status: green
OpenAlex ID: W7225992505
