Design and Simulation of a Differential MEMS Accelerometer with Interdigitated Triplet Fingers Based on a Novel SOI–Glass Bulk Microfabrication Scheme
Year: 2026
Type: preprint
Abstract: A novel microfabrication scheme based on SOI-glass bulk micromachining technique is proposed for realizing a single axis MEMS differential accelerometer with inter-digitated triplet fixed fingers. In this method, the fixed fingers are anchored all along their length to avoid their movement in response to the applied acceleration. This overcomes sensitivity degradation, which is undesired in high performance accelerometers. SOI wafer with 100 µm thick device layer is suggested for forming the proof mass. Width of the fixed fingers is chosen to be 100µm to enable wafer bonding and electrically access the fixed fingers through the wafer-bonded interface. Partial sacrificial release etch of buried oxide under fixed fingers ensures sufficient anchoring. Retention of the handle layer provides a robust stopper mechanism. The single axis acceleration sensor is modelled and designed for a range of 100g, based on the proposed process scheme. Simulations were carried out using Coventorware design software. Simulation result shows that the first mode frequency is 4481 Hz which is beyond normal system vibration frequencies as desired. Electromechanical simulations demonstrated a capacitance sensitivity of 3.1 fF/g with a linear response of 0.11%FS. The salient feature of the process scheme compared to other reported processes is that the devices fabricated will provide stoppers and completely fixed fingers with electrical access through wafer bonding interface, simplifying the packaging. Utilizing a SOI wafer with thick buried oxide and high resistivity silicon handle layer will further minimize the parasitic effects.
Source: Research Square
Language: English
Subfield: Electrical and Electronic Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: green
OpenAlex ID: W7226002666
