Work

Crack-Enabled Tubular Graphene/SEBS Flexible Sensor for High-Sensitivity Strain–Temperature Sensing in Aqueous Environments

Year: 2026
Type: article
Abstract: A multifunctional tubular flexible sensor was developed by forming a graphene/styrene-ethylene-butylene-styrene (SEBS) conductive layer on the inner wall of a commercial latex tube through solution mixing, syringe injection, solvent evaporation, and electrode assembly. The protected architecture combines crack-amplified piezoresistive strain sensing, temperature-dependent resistance, and aqueous-environment operation. The sensor exhibited piecewise strain sensitivity over 0–15%, with GF1 values of 11.95–32.74 and GF2 values of 20.24–84.63 across four different calibration specimens (n = 4), and retained distinguishable loading–unloading signals after 12,000 stretching cycles (0–15% strain). Under full immersion, heating from 25.9 to approximately 70 °C yielded an average apparent normalized temperature sensitivity of approximately 2.07% °C−1. After weak-acid and weak-alkali exposure for up to 3 d, representative short-term resistance fluctuations remained below 0.30%; static measurements in water at 8–70 °C remained below approximately 0.56%. Applications included wearable motion sensing, two-level temperature warning, robotic fruit recognition and size classification, and underwater Morse-code input. Segment-level evaluation yielded an overall accuracy of 73.94% for seven fruit classes and 86.3% for four nominal fruit-size classes. For the 52 underwater contact-event segments, the six-class recognition accuracy was 63.46%; when the six labels were collapsed into dot (point) and dash (line) groups, the derived binary accuracy was 71.2%. These application-level classification results are exploratory and do not establish generalization to independent recording sessions.
Source: Sensors
Language: English
Open Access status: gold
Estimated APC paid: $3,137
OpenAlex ID: W7226004374
FWCI:
Cites: 51
Cited by:
Related to: 10