Removal of Total Petroleum Hydrocarbons from Simulated Crude Oil Contaminated Seawater Using Plantain Stem Derived Biosorbent
Year: 2026
Type: preprint
Abstract: This study investigated the application of plantain stem biosorbent for the removal of total petroleum hydrocarbons (TPH) from simulated crude-oil-polluted seawater. The prepared contaminated seawater exhibited a slightly acidic condition (pH 6.47), salinity of 8.51 ppt, and an initial TPH concentration of 213.48 mg L⁻¹. The biosorbent was characterized using Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), and Brunauer–Emmett–Teller (BET) analysis to evaluate its surface properties and adsorption potential. The results confirmed the presence of oxygen-containing functional groups, porous morphology, and carbon-rich composition suitable for hydrocarbon adsorption. A three-factor Box–Behnken design was employed to optimize the effects of adsorbent dosage, adsorption time, and particle size on TPH removal. The quadratic model was statistically significant (F-value = 109.02, p < 0.0001) with a high coefficient of determination (R² = 0.9929), indicating good agreement between predicted and experimental values. The optimum conditions were obtained at an adsorbent dosage of 2 g L⁻¹, contact time of 20 min, and particle size of 70 µm, achieving a predicted TPH removal efficiency of 95.63%. Adsorption equilibrium analysis showed that the Langmuir model provided a better fit than the Freundlich model, suggesting monolayer adsorption on the biosorbent surface. The study demonstrates that plantain stem, an abundant agricultural residue, is a promising low-cost and sustainable biosorbent for petroleum hydrocarbon remediation in contaminated seawater.
Source: Research Square
Institution: Southern Delta University, Ozoro
Language: English
Subfield: Water Science and Technology
Field: Environmental Science
Domain: Physical Sciences
Open Access status: green
OpenAlex ID: W7226005074
