Work

Plasma Immersion Ion Implantation of AISI 316L Stainless Steel Parts Manufactured by Laser Powder Bed Fusion

Year: 2026
Type: article
Abstract: Austenitic stainless steel (SS) AISI 316L is highly compatible with laser powder bed fusion (LPBF), an advanced additive manufacturing (AM) technique for producing high-quality near-net-shape parts with complex geometries, especially for aerospace and medical applications. To further enhance its surface properties, temperature-controlled nitrogen plasma immersion ion implantation (TC-NPIII) was applied to LPBF-manufactured AISI 316L to obtain an expanded austenite ( γ N) layer, thereby enhancing surface performance and expanding the applicability of this material in demanding environments. The present work investigates the influence of TC-NPIII treatment temperature and duration on the microstructural evolution and mechanical performance of LPBF-manufactured AISI 316L. Samples were produced by LPBF in a laser-adapted powder bed system and subsequently treated by TC-NPIII, varying treatment duration for 1 and 3 h at controlled temperatures (450-520 °C). Microstructural analysis after treatment revealed a modified layer with a thickness that ranged from approximately 18.30 to 28.40 µm, superimposed on the characteristic LPBF microstructure. Grazing Incidence x-ray Diffraction (GI-XRD) analysis confirmed the formation of the desired γ N phase, while no diffraction peaks associated with chromium nitrides were detected within the investigated processing window. Cross-sectional nanoindentation measurements of the treated samples yielded hardness values of approximately 386-751 HV, representing a substantial increase compared with the untreated LPBF sample (238 HV). These results indicate that, among the treatment temperatures and durations investigated, 450 °C for 3 h represents the optimal processing condition, promoting γ N formation while preventing chromium nitride precipitation. The present work demonstrates that TC-NPIII can effectively produce expanded austenite and achieve significant surface hardening within treatment durations as short as 1-3 h. Moreover, these findings confirm the effectiveness of the TC-NPIII treatment in modifying the surface of LPBF-produced AISI 316L stainless steel, thereby enhancing its mechanical performance while preserving the characteristic hierarchical microstructure generated during LPBF.
Language: English
Open Access status: hybrid
Estimated APC paid: $3,190
OpenAlex ID: W7226009210
FWCI:
Cites: 53
Cited by:
Related to: 10