Work

Thulium- and Holmium-Doped Silica Fibres for 2 μm High-Power and Highly-Efficient Lasers

Year: 2026
Type: preprint
Abstract: Silica optical fibres, originally developed as a low-loss transmission medium for telecommunications, have evolved into a versatile platform for compact and efficient high-power lasers. This review discusses recent progress in thulium- and holmium-doped active fibres emitting within the 2 μm spectral band, with an emphasis on material and waveguide approaches that address power scaling through thermal-load mitigation and enhanced laser efficiency. In particular, the temperature dependence of absorption and emission cross-sections are reviewed, and their implications for spectral gain, amplified spontaneous emission and high-power laser operation are discussed. Structured-core thulium fibres are then considered as a route to combining the high local Tm3+ concentration required for efficient two for- one cross-relaxation with a reduced average dopant concentration, lower longitudinal heat load, and a pedestal-free waveguide design. Finally, recent results on holmium-doped silica fibres prepared by nanoparticle-assisted modified chemical vapour deposition are summarised. Crucially, the Al/Ho ratio is identified as a key compositional parameter governing laser efficiency, while a high absolute alumina content supports a long fluorescence lifetime and enables high Ho3+ concentrations without excessive clustering. These advances have enabled core-pumped holmium fibre lasers with slope efficiencies reaching 84% and output powers approaching 100W. Collectively, these development illustrate how control of spectroscopy, composition, and transverse dopant distribution can extend the performance of silica fibre lasers across the 1.7-2.2 μm spectral region.
Language: English
Open Access status: green
OpenAlex ID: W7226012624
Cites: 89
Cited by:
Related to: 10