Fabrication of dense γ-Al2O3 protective films via bipolar HiPIMS
Year: 2026
Type: article
Abstract: Achieving low-temperature growth of dense, crystalline alumina films remains a critical bottleneck for industrial cutting tool protection, as conventional high-temperature deposition induces substrate thermal softening and severe interface stress. In this study, a low-temperature (450 °C) deposition of nanocrystalline γ-Al 2 O 3 films on WC Co cemented carbide substrates was achieved utilizing bipolar high power impulse magnetron sputtering. By systematically tailoring the pulse-off time and substrate bias, the balance between discharge stability and crystallization energy was investigated. The results showed that maintaining the pulse-off time up to 125 μs promoted stable reactive sputtering and suppressed surface macroparticle formation, which is suggested to be associated with timely neutralization of accumulated target charges. Concurrently, a moderate substrate bias of -100 V appeared to provide favorable ion bombardment energy for crystalline growth without inducing severe re-sputtering defects. Under these optimum parameters, the deposited γ-Al 2 O 3 films exhibited a highly dense nano-columnar structure with a maximum hardness of 24.9 ± 1.4 GPa. Furthermore, the γ-Al 2 O 3 films exhibited stable tribological behavior with only limited material transfer from the counterparts when sliding against 45# and GCr15 steels under the tested conditions.
Source: Applied Surface Science Advances
Institutions: Guangdong University of Technology, Xiamen Tungsten (China)
Language: English
Subfield: Mechanics of Materials
Field: Engineering
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $2,350
OpenAlex ID: W7226014385
