The single-photon microwave loss of a moiré superconducting element: why the published geometry cannot measure it, and a two-device experiment that can
Year: 2026
Type: preprint
Abstract: Moiré superconductors have entered superconducting circuits as inductors, and everyone measures the wrong thing: how much inductance, not how much energy is lost, and never at the single-photon level where circuits operate. The published resonator measurements of two-dimensional superconductors used as inductors were made in a geometry that cannot measure the sample's own loss. This is not an error of execution but a consequence of the geometry: the approximation that extracts the kinetic inductance cleanly is the same approximation that blinds the loss measurement, because the sample's dissipation enters 1/Q_i multiplied by its participation p. On published numbers, and on the reading that the fitted Q_i and the 1% shift belong to the same superconducting device, everything that can be said about the quality factor of a magic-angle element is Q ≥ 21. The obstruction is removed by a mask line: shortening the line until the sample is the resonator drives p from 0.02 to 0.99998. But then the contacts become the experiment, Q_contact = Z/R_c, and the length-ladder regression meant to separate contact from intrinsic loss is degenerate once the gate capacitance a moiré device cannot do without is budgeted; I publish this here about my own design. What replaces it is a differential measurement: one chip, one gate, one cooldown, two lumped resonators matched in layout, one moiré and one base metal, and their difference. I give the element, four controls, pre-registered decision rules, four outcome bands, and the asymmetry that limits how far the number generalizes. I have not performed the measurement; the paper says why.
Author: Bilgin, F. Sami
Institution: Kocaeli Üniversitesi
Language: English
Subfield: Condensed Matter Physics
Field: Physics and Astronomy
Domain: Physical Sciences
Open Access status: green
OpenAlex ID: W7226017877
