Work

Two-plane field balancing of three agricultural and forestry rotors with a portable two-channel analyzer: run-by-run data and a recalculation of the influence-coefficient solution

Year: 2026
Type: article
Abstract: This note documents three two-plane field balancing jobs done in the machines' own bearings with a portable two-channel analyzer (Vibromera Balanset-1A): an excavator-mounted forestry mulcher drum at about 2,040 rpm, a combine harvester straw chopper at about 3,115 rpm and a forage harvester rotor at about 2,350 rpm. For each job the once-per-revolution (1×) vibration velocity and phase at both bearings are given for the initial run, both trial runs and the check run after correction, as displayed by the software, with photographs of the screens. The influence-coefficient solution is recalculated from these readings. For the mulcher, where the software's result is visible, the recalculation agrees with the displayed correction angles to within 1° and implies trial masses of about 300 g. An equivalent correction is then inferred from each check run under the same linear model and compared with the calculated one. At the bearing with the higher initial vibration, the 1× amplitude fell by about 88 to 93% in all three jobs. On the forage harvester the amplitude at the other bearing rose from 1.46 to 2.32 mm/s, and the equivalent plane 2 correction was about half the calculated one; the records do not establish why. The run data are in the attached CSV file. Competing interests: the author works with Vibromera, the maker of the instrument used.
Language: English
Open Access status: green
OpenAlex ID: W7226029099
FWCI:
Cites:
Cited by:
Related to: 10